• Code: 568-8002-02
• Description: Error in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-X1)
• Causes: The Feed Roller Separation HP Sensor does not detect the disengage roller when the Feed Roller Disengage/Buffer Flapper Motor has been driven for 3 seconds.
• Remedy: [Related parts] - Harnesses from the Feed Roller Separation HP Sensor (S111) to the Finisher Controller PCB - Harnesses from the Feed Roller Disengage/Buffer Flapper Motor (M119) to the Finisher Controller PCB - Feed Roller Separation HP Sensor (S111) - Feed Roller Disengage/Buffer Flapper Motor (M119) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 568-8003-02
• Description: Error in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-X1)
• Causes: The buffer flapper does not come off the Buffer Flapper HP Sensor when the Feed Roller Disengage/Buffer Flapper Motor has been driven for 3 seconds.
• Remedy: [Related parts] - Harnesses from the Buffer Flapper HP Sensor (S142) to the Finisher Controller PCB - Harnesses from the Feed Roller Disengage/Buffer Flapper Motor (M119) to the Finisher Controller PCB - Buffer Flapper HP Sensor (S142) - Feed Roller Disengage/Buffer Flapper Motor (M119) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 568-8004-02
• Description: Error in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-X1)
• Causes: The Buffer Flapper HP Sensor does not detect the buffer flapper when the Feed Roller Disengage/ Buffer Flapper Motor has been driven for 3 seconds.
• Remedy: [Related parts] - Harnesses from the Buffer Flapper HP Sensor (S142) to the Finisher Controller PCB - Harnesses from the Feed Roller Disengage/Buffer Flapper Motor (M119) to the Finisher Controller PCB - Buffer Flapper HP Sensor (S142) - Feed Roller Disengage/Buffer Flapper Motor (M119) - Finisher Controller PCB (PBA101) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Finisher Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 569-8001-02
• Description: a. Error in the Upper Stopper Motor (Paper Folding Unit-J1) b. Upper Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)
• Causes: a. The Upper Stopper Motor failed to move from the Upper Stopper HP Sensor position after the Upper Stopper Motor drives for the specified pulse. b. The Upper Stopper Sensor failed to be OFF despite the drive of specified pulse in the case that the Upper Stopper Motor started to be driven while the Upper Stopper Sensor was ON.
• Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the Upper Stopper HP Sensor (S23). -Harnesses from the Paper Folding Unit Controller PCB to the Upper Stopper Motor (M8). -Upper Stopper HP Sensor (S23) -Upper Stopper Motor (M8) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the Upper Stopper Sensor (S16) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the Upper Stopper Motor (M7) - Inserter/Folder ContRoller PCB (PCB2) - Upper Stopper Sensor (S16) - Upper Stopper Motor (M7) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 569-8002-02
• Description: a. Error in the Upper Stopper Motor (Paper Folding Unit-J1) b. Upper Stopper Motor failed to return to HP (Document Insertion / Folding Unit-K1)
• Causes: a. The Upper Stopper Motor failed to return to the Upper Stopper HP Sensor position after the Upper Stopper Motor drives for the specified pulse. b. The Upper Stopper Sensor failed to be ON despite the drive of specified pulse in the case that the Upper Stopper Motor started to be driven while the Upper Stopper Sensor was OFF.
• Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the Upper Stopper HP Sensor (S23). -Harnesses from the Paper Folding Unit Controller PCB to the Upper Stopper Motor (M8). -Upper Stopper HP Sensor (S23) -Upper Stopper Motor (M8) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the Upper Stopper Sensor (S16) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the Upper Stopper Motor (M7) - Inserter/Folder ContRoller PCB (PCB2) - Upper Stopper Sensor (S16) - Upper Stopper Motor (M7) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 56A-8001-02
• Description: Error in the C-fold Stopper MError in the C-fold Stopper Motor (Paper Folding Unit-J1) C Fold Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)otor (Paper Folding Unit-J1) C Fold Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)
• Causes: a. The C-fold Stopper failed to move from the C-fold Stopper HP Sensor position after the C-fold Stopper Motor drives for the specified pulse. b. The C Fold Stopper Sensor failed to be OFF despite the drive of specified pulse in the case that the C Fold Stopper Motor started to be driven while the C Fold Stopper Sensor was ON.
• Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the C-fold Stopper HP Sensor (S24). -Harnesses from the Paper Folding Unit Controller PCB to the C-fold Stopper Motor (M9). -C-fold Stopper HP Sensor (S24) -C-fold Stopper Motor (M9) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Stopper Sensor (S17) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Stopper Motor (M8) - Inserter/Folder ContRoller PCB (PCB2) - C Fold Stopper Sensor (S17) - C Fold Stopper Motor (M8) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 56A-8002-02
• Description: Error in the C-fold Stopper Motor (Paper Folding Unit-J1) C Fold Stopper Motor failed to go through HP (Document Insertion / Folding Unit-K1)
• Causes: a. The C-fold Stopper failed to return to the C-fold Stopper HP Sensor position after the C-fold Stopper Motor drives for the specified pulse. b. The C Fold Stopper Sensor failed to be ON despite the drive of specified pulse in the case that the C Fold Stopper Motor started to be driven while the C Fold Stopper Sensor was OFF.
• Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the C-fold Stopper HP Sensor (S24). -Harnesses from the Paper Folding Unit Controller PCB to the C-fold Stopper Motor (M9). -C-fold Stopper HP Sensor (S24) -C-fold Stopper Motor (M9) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Stopper Sensor (S17) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Stopper Motor (M8) - Inserter/Folder ContRoller PCB (PCB2) - C Fold Stopper Sensor (S17) - C Fold Stopper Motor (M8) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.

• Code: 56B-8001-02
• Description: Error in the Folding Tray Motor (Paper Folding Unit-J1) C Fold Tray Motor failed to go through HP (Document Insertion / Folding Unit-K1)
• Causes: a. The Folding Tray failed to move from the Folding Tray HP Sensor position after the Folding Tray Motor drives for the specified pulse. b. The C Fold Tray Motor Sensor failed to be OFF despite the drive of specified pulse in the case that the C Fold Tray Motor started to be driven while the C Fold Tray Motor Sensor was ON.
• Remedy: a. Paper Folding Unit-J1 [Related parts] -Harnesses from the Paper Folding Unit Controller PCB to the Fold Tray HP Sensor (S28). -Harnesses from the Paper Folding Unit Controller PCB to the Folding Tray Motor (M7). -Fold Tray HP Sensor (S28) -Folding Tray Motor (M7) -Paper Folding Unit Controller PCB (PCB1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] When replacing the Paper Folding Unit Controller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual. b. Document Insertion / Folding Unit-K1 [Related parts] - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Tray Motor Sensor (S19) - Harnesses from the Inserter/Folder ContRoller PCB (PCB2) to the C Fold Tray Motor (M6) - Inserter/Folder ContRoller PCB (PCB2) - C Fold Tray Motor Sensor (S19) - C Fold Tray Motor (M6) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] - When replacing the Inserter/Folder ContRoller PCB, refer to "Adjustments> Adjustment when Replacing the Parts" in the Service Manual.