Code :

Code: 733-0F00-05
Description: Printer communication error
Causes: Communication error that can be recovered by reboot If it is detected again immediately after reboot, E733-0000 is generated.
Remedy: It is not necessary to perform a remedy because the machine is automatically rebooted after log collection.

Code: 733-0F01-05
Description: Printer communication error
Causes: Communication error that can be recovered by reboot If it is detected again immediately after reboot, E733-0001 is generated.
Remedy: It is not necessary to perform a remedy because the machine is automatically rebooted after log collection.

Code: 733-0F02-05
Description: Printer communication error
Causes: Communication error that can be recovered by reboot If it is detected again immediately after reboot, E733-0002 is generated.
Remedy: It is not necessary to perform a remedy because the machine is automatically rebooted after log collection.

Code: 743-0000-04
Description: Communication error
Causes: The Reader Controller PCB detected a communication error between the Main Controller PCB and the Reader Controller PCB.
Remedy: [Related parts] R1.00 - Connector between the Main Controller PCB (UN158/J1020) and the Riser PCB (UN159/J8) - Harness between the Riser PCB (UN159/J7) and the Reader Controller PCB (UN1/J109) - Riser PCB (UN159) - Main Controller PCB (UN158) - Reader Controller PCB (UN1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 744-0001-00
Description: Language file error
Causes: The language file in HDD was not supported by the version of Bootable.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.

Code: 744-0003-00
Description: Language file error
Causes: The language file to be switched to that was described in the Config.txt in HDD was not found.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.

Code: 744-0004-00
Description: Language file error
Causes: Switching to the language file in the HDD failed.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.