Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7580i — Trang 10/112

Code: 021-0201-05

Description: Developing Sleeve Drive Motor (M) error
Causes: The lock signal of the Developing Sleeve Drive Motor (M) could not be detected within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1910) and the Developing Sleeve Drive Motor (M) (M22/J7536) - Developing Sleeve Drive Motor (M) (M22) - Developing Assembly (M) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 021-0202-05

Description: Developing Sleeve Drive Motor (M) error
Causes: The Developing Sleeve Drive Motor (M) was unlocked although it had been locked once.
Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1910) and the Developing Sleeve Drive Motor (M) (M22/J7536) - Developing Sleeve Drive Motor (M) (M22) - Developing Assembly (M) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 021-0301-05

Description: Developing Sleeve Drive Motor (C) error
Causes: The lock signal of the Developing Sleeve Drive Motor (C) could not be detected within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1910) and the Developing Sleeve Drive Motor (C) (M24/J7537) - Developing Sleeve Drive Motor (C) (M24) - Developing Assembly (C) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 021-0302-05

Description: Developing Sleeve Drive Motor (C) error
Causes: The Developing Sleeve Drive Motor (C) was unlocked although it had been locked once.
Remedy: [Related parts] R1.00 - Harness between the Drum Driver PCB (UN6/J1910) and the Developing Sleeve Drive Motor (C) (M24/J7537) - Developing Sleeve Drive Motor (C) (M24) - Developing Assembly (C) - Drum Driver PCB (UN6) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 021-0401-05

Description: Developing Sleeve Drive Motor (Bk) error
Causes: The lock signal of the Developing Sleeve Drive Motor (Bk) could not be detected within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the Multi Driver PCB (UN97/J1351) and the Developing Sleeve Drive Motor (Bk) (M18/J7538) - Developing Sleeve Drive Motor (Bk) (M18) - Developing Assembly (Bk) - Multi Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 021-0402-05

Description: Developing Sleeve Drive Motor (Bk) error
Causes: The Developing Sleeve Drive Motor (Bk) was unlocked although it had been locked once.
Remedy: [Related parts] R1.00 - Harness between the Multi Driver PCB (UN97/J1351) and the Developing Sleeve Drive Motor (Bk) (M18/J7538) - Developing Sleeve Drive Motor (Bk) (M18) - Developing Assembly (Bk) - Multi Driver PCB (UN97) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 022-0001-05

Description: Drum Cleaning and Waste Toner Feed Drive Motor error
Causes: The lock signal of the Drum Cleaning and Waste Toner Feed Drive Motor could not be detected within the specified period of time.
Remedy: [Related parts] R1.00 - Harness between the Multi Driver PCB (UN97/J1351) and the Drum Cleaning and Waste Toner Feed Drive Motor (M30/J7539) - Drum Cleaning and Waste Toner Feed Drive Motor (M30) - Multi Driver PCB (UN97) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Remove the clogged toner in the Waste Toner Pipe. 2. Check/replace the related harness/cable, connector and parts.

Code: 022-0002-05

Description: Drum Cleaning and Waste Toner Feed Drive Motor error
Causes: The Drum Cleaning and Waste Toner Feed Drive Motor was unlocked although it had been locked once.
Remedy: [Related parts] R1.00 - Harness between the Multi Driver PCB (UN97/J1351) and the Drum Cleaning and Waste Toner Feed Drive Motor (M30/J7539) - Drum Cleaning and Waste Toner Feed Drive Motor (M30) - Multi Driver PCB (UN97) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Remove the clogged toner in the Waste Toner Pipe. 2. Check/replace the related harness/cable, connector and parts.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie