Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR1730 — Trang 3/10

Code: E024-0001

Description: Detection of disconnection of the Developing Assembly Toner Sensor (TS2)
At normal speed: Developing Assembly Toner Sensor (TS2) signals were detected 7500 times in a row at intervals of 100 msec. At low speed: Developing Assembly Toner Sensor (TS2) signals were detected 4500 times in a row at intervals of 100 msec.
Remedy: 1. Check the connection of the Connector (J209). 2. Correct the wiring. 3. Replace the Developing Assembly Toner Sensor (TS2).

Code: E025-0000

Description: Connector disconnection of the Hopper Toner Sensor (TS1) or the DC Controller PCB (J211)
Hopper Toner Sensor (TS1) connection detection signals were not detected 10 times in a row in 100 msec. * If paper is being fed, the error occurs after the paper has been delivered.
Remedy: 1. Check the connection of the Connector (J211). 2. Replace the Hopper Toner Sensor (TS1). 3. Replace the DC Controller PCB (PCB1).

Code: E025-0001

Description: Bottle Motor (M5) error
The lock detection flag of the Bottle Motor (M5) was monitored at intervals of 2 msec, and the same level was detected 800 times in a row. * If paper is being fed, the error occurs after the paper has been delivered.
Remedy: 1. Replace the Bottle Motor (M5). 2. Replace the DC Controller PCB (PCB1).

Code: E110-0001

Description: Laser Scanner Motor error
After startup of the Laser Scanner Motor, the speed lock signal of the Laser Scanner Motor never showed lock status although a specified period of time had passed. *When the same status was detected again after executing an error retry.
Remedy: 1. Check the Laser Scanner Unit connector. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (PCB1).

Code: E110-0002

Description: Laser Scanner Motor error
After the speed lock of the Laser Scanner Motor had been settled, the speed lock signals showed unlocked status 10 times in a row at intervals of 100 msec. *When the same status was detected again after executing an error retry.
Remedy: 1. Check the Laser Scanner Unit connector. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (PCB1).

Code: E110-0003

Description: Laser Scanner Motor error
The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passed. *When the same status was detected again after executing an error retry.
Remedy: 1. Check the Laser Scanner Unit connector. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (PCB1).

Code: E196-0000

Description: EEPROM access error
During communication with EEPROM, a communication error occurred, and the error was not cleared although a retry was executed three times. * If paper is being fed, the error occurs after the paper has been delivered.
Remedy: 1. Replace the DC Controller PCB (PCB1).

Code: E197-0000

Description: Laser Driver PCB communication error
Error in communication with the Laser Driver PCB (communication data failure)
Remedy: 1. Check the Laser Scanner Unit connector. 2. Replace the Laser Scanner Unit. 3. Replace the DC Controller PCB (PCB1).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie