Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3225 — Trang 3/30

Code: E025-0000

Description: The hopper motor or the bottle motor is faulty.
The sub hopper toner sensor connection detection signal is absent for 100 msec 10 times in sequence.
Remedy: Replace the sub hopper toner sensor. Connect the connector. Replace the detection PCB.

Code: E025-0001

Description: The hopper motor or the bottle motor is faulty.
While the hopper motor is rotating, the motor error lock signal is detected continuously 4 times every 56 msec. Or, while the bottle motor is rotating, the motor error lock signal is detected 22 times in sequence every 10 msec.
Remedy: Replace the hopper motor. Replace the bottle motor. Replace the DC controller PCB.

Code: E032-0001

Description: The NE controller counter malfunctions.
An open circuit is detected for the count pulse signal.
Remedy: Turn off the main power, and check the cable for an open circuit; then, turn the main power back on.

Code: E064-0001

Description: The voltage of the power supply is faulty (high-voltage error).
The value read from the EEPORM is outside a specific range.
Remedy: Turn off and then back on the main power. Replace the EEPROM.

Code: E064-0002

Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the DC controller PCB.

Code: E064-0003

Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the DC controller PCB.

Code: E064-0004

Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the controller PCB.

Code: E064-0005

Description: The voltage of the power supply is faulty (high-voltage error).
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Remedy: Replace the high-voltage power supply. Replace the DC controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie