Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3235 — Trang 19/30

Code: E5F5-0002

Description: Saddle front stapling error
The stitching home position sensor does not go off when the switch motor (front) has been rotated in normal direction for 0.5 sec or more. Stitch motor (front; M7S)/stitching home position sensor (front; MS7S)
Remedy: Replace the stitcher (front). Check the harness. Replace the finisher controller PCB.

Code: E5F6-0001

Description: Saddle butting error
The paper butting plate home position sensor does not go on when the paper butting plate motor has been driven for 0.3 sec. Paper butting plate motor (M8S)/paper butting plate home position sensor (PI14S)
Remedy: Check the paper butting plate motor. Check the paper butting plate home position sensor. Replace the finisher controller PCB.

Code: E5F6-0002

Description: Saddle butting error
The paper butting plate home position sensor does not go off when the paper butting plate motor has been driven for 80 msec or more. Paper butting plate motor (M8S)/paper butting plate home position sensor (PI14S)
Remedy: Check the paper butting plate motor. Check the paper butting plate home position sensor. Replace the finisher controller PCB.

Code: E5F6-0003

Description: Saddle butting error
The number of detection pulses of the paper butting plate motor has dropped below a specific value. paper butting plate motor (M8S)/paper butting plate motor clock sensor (PI1S)
Remedy: Check the paper butting plate motor. Check the paper butting plate motor clock sensor. Replace the finisher controller PCB.

Code: E5F6-0004

Description: Saddle butting error
The paper butting plate leading edge sensor does not go off when the paper butting plate motor has been driven for 80 msec. Paper butting plate motor (M8S)/paper butting plate leading edge sensor (PI15S)
Remedy: Check the paper butting plate motor. Check the paper butting plate leading edge sensor. Replace the finisher controller PCB.

Code: E5F6-0005

Description: Saddle butting error
The paper butting plate leading edge sensor does not go on when the paper butting plate motor has been driven for 0.3 sec. Paper butting plate more (M8S)/paper butting plate leading edge sensor (PI15S)
Remedy: Check the paper butting plate motor. Check the paper butting plate leading edge sensor. Replace the finisher controller PCB.

Code: E5F8-0001

Description: Saddle connector error
The connector of the paper butting plate home position sensor has been identified as being disconnected. Connector of guide home position sensor (PI13S)
Remedy: Connect the connector of the guide home position sensor. Check the harness. Replace the finisher controller PCB.

Code: E5F8-0002

Description: Saddle connector error
The connector of the paper butting plate home position sensor has been identified as being disconnected. Connector of paper butting plate home position sensor (PI14S)
Remedy: Connect the connector of the paper butting plate home position sensor. Check the harness. Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie