Code :

Code: E5F6-8005
Description: There is a saddle butting error.
The paper pushing plate leading edge position sensor does not go on even when the paper pushing plate has been driven for 0.3 sec or more. paper pushing plate motor (M8S), paper pushing plate leading edge position sensor (PI15S)
Remedy: - Check the paper pushing plate motor (M8S) and the paper pushing plate leading edge position sensor (PI15S).

Code: E5F9-0001
Description: There is a saddle switch error.
With any of the sensor identifying its respective cover as being closed, the inlet cover switch is identified as being open for 1 sec from the start of initial rotation or printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) Or, the front cover switch (MS2S) or the delivery cover switch (MS3S) is open. inlet cover switch (MS1S), front cover switch (MS2S), delivery cover switch (MS3S)
Remedy: - Check the inlet cover switch (MS1S), front cover switch (MS2S), and the delivery cover switch (MS3S).

Code: E5F9-0002
Description: There is a saddle switch error.
With any of the following sensors identifying its respective cover as being closed, the front cover switch is identified as being open for 1 sec or more after the start of initial rotation or printing. - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) - front cover switch (MS2S), delivery cover switch (MS3S)
Remedy: - Check the front cover switch (MS2S) and the delivery cover switch (MS3S).

Code: E5F9-0003
Description: There is a saddle switch error.
With any of the following sensors identifying its respective cover as being closed, the delivery cover switch is identified as being open for 1 sec or more from the start of initial rotation or printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) - delivery cover switch (MS3S)
Remedy: - Check the delivery cover switch (MS3S).

Code: E604-0000
Description: The image memory is faulty or inadequate.
The memory is inadequate for the model.
Remedy: - Add memory.

Code: E609-0008
Description: The hard disk is faulty.
At time of start-up, the HDD fails to reach a specific temperature within a specific period of time.
Remedy: - Replace the hard disk. - Replace the DC controller PCB.

Code: E609-0009
Description: The hard disk is faulty.
At time of a sleep shift, the temperature is below a specific level.
Remedy: - Replace the hard disk. - Replace the DC controller PCB.