Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR5075 — Trang 18/21

Code: E713-0000

Description: There is a sorter IPC error.
An error has been detected in the sorter communication IC.
Remedy: - Check the connection of the cable. - Replace the finisher controller PCB. - Replace the DC controller PCB.

Code: E717-0001

Description: There is a fault in the communication with the NE controller. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
An error has occurred at time of NE controller start-up. The NE controller that was connected before power-off is not connected at power-on.
Remedy: - Check the connection of the cable.

Code: E717-0002

Description: There is a fault in the communication with the NE controller. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
There is an IP error while the NE controller is in operation. The IPC may have an open circuit or the IPC communication cannot be recovered.
Remedy: - Check the connection of the cable.

Code: E719-0001

Description: There is a fault in the coin vendor. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
An error has occurred at time of coin vendor start-up. The coin vendor was connected before power-off, but is not connected at power-on.
Remedy: - Check the connector of the cable.

Code: E719-0002

Description: There is a fault in the coin vendor. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
An IPC error has occurred while the coin vendor is in operation. The IPC may have an open circuit, or the IPC communication cannot be recovered. The pickup/delivery signal line has an open circuit. An illegal connection has been detected.
Remedy: - Check the connector of the cable.

Code: E719-0003

Description: There is a fault in the coin vendor. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
While a unit price is being obtained at start-up, an error has occurred in the communication with the coin vendor.
Remedy: - Check the connector of the cable.

Code: E719-0011

Description: There is a fault in the coin vendor. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
An error has occurred at card reader start-up. The card reader that was connected before power-off is not connected at power-on.
Remedy: - Check the connector of the cable.

Code: E719-0012

Description: There is a fault in the coin vendor. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
An IPC error has occurred while the card reader is in operation. The IPC may have an open circuit, or the IPC communication cannot be recovered.
Remedy: - Check the connector of the cable.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie