Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR7105 — Trang 7/17

Code: E121-0003

Description: A fault exists in the rotation of the following: laser scanner unit cooling fan, reader heat discharge fan 1, reader heat discharge fan 2.
The reader heat discharge fan 2 has a fault. After the reader heat discharge fan 2 has gone on, the fan stop signal is detected for 5 sec or more.
Remedy: Disconnect and then connect J521 of the DC controller PCB. Replace the reader heat discharge fan 2. Replace the DC controller PCB.

Code: E197-0000

Description: The laser scanner motor communication has a fault.
The communication with the laser control IC is not normal.
Remedy: Replace the laser scanner unit. Replace the video PCB.

Code: E202-0001

Description: The scanner HP detection mechanism has a fault.
At time of shading, the intensity of light is below the standard level.
Remedy: Disconnect and then connect the connector of the scanner HP sensor. Replace the scanner HP sensor. Replace the scanner motor. Replace the reader controller PCB.

Code: E202-0002

Description: The scanner HP detection mechanism has a fault.
In ADF mode, the intensity of light is below the standard level between sheets.
Remedy: Disconnect and then connect the connector of the scanner HP sensor. Replace the scanner HP sensor. Replace the scanner motor. Replace the reader controller PCB.

Code: E227-0001

Description: The reader unit power supply (24 V) has a fault.
At power-on, the 24V port is off.
Remedy: Disconnect and then connect the reader power supply connector. Replace the power supply.

Code: E227-0002

Description: The reader unit power supply (24 V) has a fault.
At the start of a job, the 24V port is off.
Remedy: Disconnect and then connect the reader power supply connector. Replace the power supply.

Code: E227-0003

Description: The reader unit power supply (24 V) has a fault.
At the end of a job, the 24V port is off.
Remedy: Disconnect and then connect the reader power supply connector. Replace the power supply.

Code: E227-0004

Description: The reader unit power supply (24 V) has a fault.
While a load is driven, the 24V port is off.
Remedy: Disconnect and then connect the reader power supply connector. Replace the power supply.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie