Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR7105 — Trang 9/17

Code: E315-000d

Description: The image data codec has a fault.
A JBIG decoding error has occurred.
Remedy: Replace the DDR-SDRAM. Replace the HDD. Replace the main controller PCB.

Code: E315-000e

Description: The image data codec has a fault.
An error has occurred in the course of software decoding.
Remedy: Replace the DDR-SDRAM. Replace the HDD. Replace the main controller PCB.

Code: E315-0100

Description: The image data codec has a fault.
An overrun error has occurred.
Remedy: Replace the main controller PCB.

Code: E315-0200

Description: The image data codec has a fault.
The open I/F relay PCB has detected an error (no recovery after a retry).
Remedy: Replace the open I/F relay PCB (relay PCB between the main controller and PS controller).

Code: E315-0300

Description: The image data codec has a fault.
Cubic time-out
Remedy: Turn off and then back on he power. Replace the main controller PCB.

Code: E315-0400

Description: The image data codec has a fault.
Shift Device A time-out
Remedy: Turn off and then back on he power. Replace the main controller PCB.

Code: E315-0401

Description: The image data codec has a fault.
Shift Device B time-out
Remedy: Turn off and then back on he power. Replace the main controller PCB.

Code: E351-0000

Description: An error has occurred in the main controller communication.
At start-up, a main controller communication error has occurred.
Remedy: Replace the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie