Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR7105 — Trang 11/17

Code: E413-0002

Description: The ADF shift motor rotation is faulty.
Shift motor HP sensor is closed.
Remedy: Disconnect and then connect the connector. Replace the shift motor HP sensor. Replace the shift motor.

Code: E420-0000

Description: An ADF EEPROM read error has occurred.
At power-on, an attempt to read the EEPROM backup data fails. Or, data that has been read has a fault.
Remedy: Replace the ADF controller PCB.

Code: E490-0001

Description: The ADF is of the wrong type.
Remedy: Replace the ADF.

Code: E602

Description: The HDD has an error.
Remedy:

Code: E604-0000

Description: The time memory (DDR-SDRAM) is faulty or inadequate.
A DDR-SDRAM (1 GB) of adequate capacity is not detected.
Remedy: Replace the DDR-SDRAM.

Code: E609-0008

Description: The HDD temperature is abnormally low.
At start-up, the HDD does not reach a specific temperature within a specific time.
Remedy: Replace the HDD.

Code: E609-0009

Description: The HDD temperature is abnormally low.
When returning from sleep mode, the HDD does not reach a specific temperature within a specific time
Remedy: Replace the HDD.

Code: E610

Description: The HDD encryption key is faulty.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie