• Code: E719-0012
• Description: An error has occurred in the communication with the coin vendor/card reader. After correcting the fault, be sure to reset the error. (COPIER>FUNCTION>CLEAR>ERR)
  In the communication with the card reader, an error that cannot be reset has occurred (e.g., cable break).
• Remedy: Disconnect and then connect the connector of the main controller PCB. Install the card reader. Replace the card reader.

• Code: E730-1001
• Description: A PDL-related error has occurred.
  An initialization error has occurred at the start of a job.
• Remedy: Reset the PDL mechanism. Turn off and then on the power.

• Code: E730-100A
• Description: A PDL-related error has occurred.
  An error has occurred in the communication with an external controller.
• Remedy: Reset the PDL mechanism. Turn off and then on the power.

• Code: E730-9004
• Description: A PDL-related error has occurred.
  A fault has been detected in the cable connection with an external controller.
• Remedy: Turn off and then on the power. Replace the external controller relay PCB. Replace the external controller.

• Code: E730-9005
• Description: A PDL-related error has occurred.
  A fault has been detected in the cable connection with an external controller.
• Remedy: Turn off and then on the power. Replace the external controller relay PCB. Replace the external controller.

• Code: E730-A006
• Description: A PDL-related error has occurred.
  The PDL mechanism does not respond.
• Remedy: Reset the PDL mechanism. Turn off and then on the power. Reinstall the system software. Replace the main controller.

• Code: E730-A007
• Description: A PDL-related error has occurred.
  At start-up, the version of the machine control software and that of the PDL control software do not match.
• Remedy: Reset the PDL mechanism. Turn off and then on the power. Reinstall the system software. Replace the main controller.

• Code: E730-B013
• Description: A PDL-related error has occurred.
  The font data is corrupted at start-up.
• Remedy: Turn off and then on the power. Reinstall the system software. Execute full formatting of the HDD, and reinstall the system software.