Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson AcuLaser C2600 — Trang 5/8

Code: C1400

Description: Engine initialization error
Remedy: Engine Controller

Code: C1700

Description: Built-in network hard ware error
Remedy: Network Board

Code: C1720

Description: Network board uninstalled
Remedy: Network Board

Code: C1999

Description: Other hardware errors
Remedy: Controller Board

Code: C2000

Description: Software error
Remedy: Program DIMM

Code: C999

Description: Engine flash ROM has no program data
Remedy: Program DIMM

Code: E090

Description: Inconsistent patch sensing
Remedy: 1 Open and close the Cover D to clean the density sensor. 2 Check the connection status between the Density Sensor (Transfer Unit, Assy., ASP) and the MCU. [TRANSFER UNIT, Assy., ASP] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN110) Inspect the sensor cleaner on the transfer unit for any abnormality. 3 Replace the [TRANSFER UNIT, Assy., ASP]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].

Code: E091

Description: Low voltage power supply error
Remedy: 1 Check the connection status between the LVPS and the MCU. [POWER SUPPLY] (P13) - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN103) [POWER SUPPLY] (P12) - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN109) 2 Replace the [POWER SUPPLY]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie