Remedy: 1 Check the connection status between the Fuser Unit and the MCU. [Fuser unit] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN109) 3 Replace the [Fuser unit]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].
Remedy: 1 Check the connection status between the Photoconductor Unit and the MCU. [Photoconductor unit] - [ELECTRODE Assy., PC] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN108) 2 Replace the Photoconductor Unit. 3 Replace the [BOARD ASSY., MAIN C585 MCU].
Remedy: 1 Check the connection status between the sensor and the MCU. [DETECTOR, HUMIDITY] - [BOARD ASSY., MAIN C585 MCU] (CN127) 2 Replace the [DETECTOR, HUMIDITY]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].
Remedy: 1 Check the connection status between the LSU and the MCU. [Laser Scanner] - [HARNESS, LSU] - [BOARD ASSY., MAIN C585 MCU] (CN120) 2 Replace the [Laser Scanner]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].
Remedy: 1 Check the connection status between the sensor and the MCU. [TRANSFER UNIT, Assy., ASP] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN110) 2 Check the flag for detecting VSYNC (convex portion) on the extreme right of the Transfer Belt for any abnormality. 3 Replace the [TRANSFER UNIT, Assy., ASP]. 4 Check the connection status between the Motor and the MCU. [SERVOMOTOR, PC] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN105) 5 Replace the [SERVOMOTOR, PC].
Remedy: 1 Check the connection status for the all connections between the Motor and the MCU. [DC MOTOR, OP] - [HARNESS, CASSETTE, MOTOR] - [BOARD ASSY., SUB C585 SUB] (CN403) - [BOARD ASSY., SUB C585 SUB] (CN401) - [HARNESS, CASSETTE] - [CONNECTOR, OP] - [HARNESS, PAPER LOAD] - [BOARD ASSY., MAIN C585 MCU] (CN116) 2 Replace the [DC MOTOR, OP]. 3 Replace the [BOARD ASSY., SUB C585 SUB]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].
Remedy: 1 Check the connection status between the Motor and the MCU. [SERVOMOTOR, PC] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN105) 2 Replace the [SERVOMOTOR, PC]. 3 Replace the [BOARD ASSY., MAIN C585 MCU].
Remedy: 1 Check the connection status between the Motor and the MCU. [DRIVE ASSY., RT, ASP] - [BOARD ASSY., DRV, C585 DRV] (CN212) - [BOARD ASSY., DRV,C585 DRV] (CN210, CN251) - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN104, CN122) 2 Remove the rear cover of the printer to let the printer perform initializing operation, and check if the rotary lock lever operates normally. 3 Check the connection status between the Rotary Lock Unit and the MCU. [LOCK ASSY., RT] - [BOARD ASSY., DRV, C585 DRV] (CN213) - [BOARD ASSY., DRV, C585 DRV] (CN210, CN251) - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN104, CN122) 4 Replace the [LOCK ASSY., RT]. 5 Remove the rear cover to let the printer perform initializing operation, and check if the rotary stops at its home position. 6 Check the connection status between the Rotary HP Sensor and the MCU. [DETECTOR, PC] - [HARNESS, HP] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN108)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.