• Code: E115
• Description: Main drive motor error
• Remedy: 1 Check the connection status between the Motor and the MCU. [SERVOMOTOR, DRIVE] - [HARNESS, MAIN] - [BOARD ASSY., MAIN C585 MCU] (CN123) 2 Check the paper feed path for remaining papers. 3 Remove the MCU Board and rotate the motor with your hand to check if the motor rotates normally without any interference. 4 Check if the roller and gear of the Fuser Unit are damaged. 5 Replace the [SERVOMOTOR, DRIVE]. 6 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E116
• Description: Scanner motor error
• Remedy: 1 Check if the starting sound of the motor is audible. 2 Check the connection status between the LSU and the MCU. [Laser Scanner] (P204) - [HARNESS, LSU] - [BOARD ASSY., MAIN C585 MCU] (CN118) 3 Replace the [Laser Scanner]. 4 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E123
• Description: Large temperature change
• Remedy: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E124
• Description: Abnormally high temperature
• Remedy: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E125
• Description: Abnormally low temperature 2
• Remedy: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E126
• Description: Abnormally low temperature 1
• Remedy: 1 Check if the NIP lever is used at the position for envelopes. 2 Check the Fuser Unit for the followings. Check if paper is jammed at the Fuser. Check the fuser roller for any scratch or foreign material. Rotate the green knob on the backside of the fuser unit in order to check if the spur gear 19 and heat roller turn smoothly. 3 Replace the [Fuser unit]. 4 Replace the [POWER SUPPLY]. 5 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E132
• Description: Inconsistent engine controller memory
• Remedy: 1 Check the FRAM Board for the connection status. Check if the connector is securely connected. 2 Replace the [BOARD ASSY., MAIN C585 MCU].

• Code: E144
• Description: Transfer belt unit end of life
• Remedy: 1 Replace the [TRANSFER UNIT, Assy., ASP], and the reset the life counter.