Mã lỗi Epson Stylus Pro 11880C — Trang 4/7
Description: Pressure motor 1 reverse detection error
Abnormality of the revolution of the Pressure Motor has been detected.
Remedy: Replace the Pressure Pump Unit.
Description: Pressure motor 2 reverse detection error
Abnormality of the revolution of the Pressure Motor has been detected.
Remedy: Replace the Pressure Pump Unit.
Description: Pressure motor 3 reverse detection error
Abnormality of the revolution of the Pressure Motor has been detected.
Remedy: Replace the Pressure Pump Unit.
Description: PG HP detection error
The home position of the platen gap cannot be detected.
Remedy: Check the connection of the PG Sensor. Replace the PG Sensor. Replace the PG Sensor.
Description: APG motor drive timeover error
The motor driving does not end even after the specified period of time has passed.
Remedy: Install the latest firmware. Replace the Main Board Assy.
Description: Pressurizing reset failure
The pressurizing cannot be reset. The Pressure Sensor remains on, even after the pressurizing has been reset.
Remedy: Replace the Pressure Pump Unit.
Description: Cap unit status error 1
The position of the Cap Unit is wrong.
Remedy: Replace the Ink System Unit (Cap Unit HP Sensor). Replace the Ink System Motor.
Description: Cap unit status error 2
The position of the Cap Unit is wrong.
Remedy: Replace the Ink System Unit (Cap Unit HP Sensor). Replace the Ink System Motor.