Mã lỗi Epson Stylus Pro 11880C — Trang 6/7
Description: Main board IC2 error
The destination is wrong.
Remedy: Configure the destination again.
Description: Head rank ID input error
The information of the Head rank ID is wrong.
Remedy: Configure the Head rank ID again.
Description: NVRAM error
NVRAM erase or write error has occurred.
Remedy: Replace the Main Board Assy.
Description: SDRAM error
SDRAM read/write error has occurred.
Remedy: Replace the Main Board Assy.
Description: BOOT program sum error
Installation of the firmware has been failed. The Flash ROM has a defect.
Remedy: Install the firmware again. Replace the Main Board Assy.
Description: Program loading error
The SDRAM has a defect. The program cannot be loaded on the SDRAM.
Remedy: Replace the Main Board Assy.
Description: Internal insufficient memory error
The firmware has a defect.
Remedy: Install the correct firmware.
Description: Servo interrupt watchdog time-out error
The servo cannot be controlled.
Remedy: Install the correct firmware. Replace the Main Board Assy.