Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson Stylus Pro 7500 — Trang 4/4

Code: 0100

Description: Waste Ink pads is almost full (less than 1% remaining)
The waste ink pads are almost full, causing a warning error. The printer can continue printing, but this messages overrides status messages such as Ready or Printing.
Remedy: Replace the following parts and reset the counters as described below • Waste Ink Pads • F Box • Pump Assembly • Cap Assembly • Cleaner, Head • From Maintenance Mode 2 enter the Counter Init. Menu and initialize the Waste Ink counter and Cleaning counter.

Code: 10020004

Description: CPU vector 4 - General illegal instruction
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

Code: 10020006

Description: CPU vector 6 - Slot illegal instruction
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

Code: 10020009

Description: CPU vector 9 - CPU address error
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

Code: 1002000A

Description: CPU vector 10 - DMAC/DTC address error
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

Code: 1002000B

Description: CPU vector 11 - Watchdog time-out error
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.

Code: 100200xx

Description: CPU vector 32 - 63
Remedy: • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie