Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson SureColor S50600 — Trang 4/14

Code: 141E

Description: Pump Motor velocity deviation error
The Pump Motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump Motor encoder failure • Pump Motor failure • Pump Motor driver failure
Remedy: 1. Replace the Pump Motor encoder and Pump Motor . 2. Replace the Main Board.

Code: 141F

Description: Pump Motor lock error
The PF Motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump Motor encoder failure • Pump Motor failure
Remedy: Replace the Pump Motor encoder and Pump Motor .

Code: 1429

Description: Circulation pump motor oscillation error
The control terminal (Vre terminal) for the circulation pump motor driver is short-circuited.
Remedy: 1. Remove the foreign object. 2. Replace the Main Board.

Code: 142A

Description: Circulation pump motor overload error
Overcurrent to the circulation pump motor was detected. • Disconnection of the circulation pump motor cable. • Overload • Failure of the circulation pump motor encoder • Failure of the circulation pump motor
Remedy: Replace the Circulation Pump Unit.

Code: 142B

Description: Circulation pump motor overspeed error
When the circulation pump motor should slow down, it was driving faster than a predetermined speed. • Overload • Failure of the circulation pump motor encoder • Failure of the circulation pump motor driver
Remedy: 1. Replace the Circulation Pump Unit. 2. Replace the Main Board.

Code: 142C

Description: Circulation pump motor reversing error
The number of detections of reverse driving of the circulation pump motor has reached a predetermined limit. • Incorrect connection of the circulation pump motor cable • Failure of the circulation pump motor
Remedy: Replace the Circulation Pump Unit.

Code: 142D

Description: Circulation pump motor driving time-out error
The circulation pump motor was driving for an abnormally long time. • Overload • Firmware runaway
Remedy: Replace the Main Board.

Code: 142E

Description: Circulation pump motor velocity deviation error
When the circulation pump motor should speed up or slow down, it was driving at an abnormally high speed exceeding a predetermined velocity. • Overload • Failure of the circulation pump motor encoder • Failure of the circulation pump motor • Failure of the circulation pump motor driver
Remedy: 1. Replace the Circulation Pump Unit. 2. Replace the Main Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie