Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson SureColor S50610

Code: 1101

Description: Ink Tubes life error
The Ink Tubes have reached the end of their service life. (CR scan pass counter has reached a predetermined limit.)
Remedy: Replace the Ink Tubes and reset the counter .

Code: 1125

Description: CR HP detection error
The CR Unit does not respond to the CR HP Sensor, or the sensor failed to detect the home position. • CR HP Sensor failure • False detection of the home due to paper jam or any other obstacle • Misreading of the CR Scale • CR Lock is damaged.
Remedy: 1. Replace the CR Encoder. 2. Re-install the CR Encoder. If it is faulty, replace it. 3. Clean the CR Scale using ethanol. 4. Replace the CR Scale. 5. Replace the CR Lock .

Code: 1138

Description: CR Motor overcurrent error
1. Connection failure of the CR Motor or the CR Encoder. 2. The number of occurrences of overcurrent to the CR Motor has reached a predetermined limit. • Irregular load • CR Encoder failure • CR Motor failure
Remedy: 1. Replace the CR Encoder. 2. Replace the CR Motor.

Code: 1139

Description: CR Motor oscillation error
The control terminal (Vre terminal) of the CR Motor driver has shorted out.
Remedy: 1. Remove the foreign material. 2. If the error still occurs, replace the Main Board.

Code: 113A

Description: CR Motor overload error
Overcurrent to the CR Motor was detected. • CR Encoder cable is damaged. • CR Motor cable is damaged. • Irregular load • CR Encoder failure • CR Motor failure
Remedy: 1. Re-install the CR Unit. 2. Replace the CR Encoder. 3. Replace the CR Motor.

Code: 113B

Description: CR Motor over speed error
The CR Motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR Encoder failure • SUB Board is damaged. • CR Motor driver failure
Remedy: 1. Replace the CR Encoder. 2. Replace the SUB Board. 3. Replace the Main Board.

Code: 113C

Description: CR Motor reversing error
The number of occurrences of reversing the CR Motor has reached a predetermined limit. • The polarity of CR Encoder cable is opposite. • The polarity of CR Motor cable is opposite. • Slipping of the teeth of CR Timing Belt • CR Encoder failure
Remedy: 1. Adjust the tension of the CR Timing Belt. 2. Replace the CR Encoder.

Code: 113D

Description: CR Motor driving time-out error
Abnormally-long driving duration of the CR Motor was detected. • Irregular load • Firmware becomes out of control
Remedy: Replace the Main Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie