• Code: 113E
• Description: CR Motor velocity deviation error
  The CR Motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR Encoder failure • CR Motor failure • SUB Board is damaged. • CR Motor driver failure
• Remedy: 1. Replace the CR Encoder. 2. Replace the CR Motor. 3. Replace the SUB Board. 4. Replace the Main Board.

• Code: 113F
• Description: CR Motor lock error
  The CR Motor was driven at a speed abnormally slower than a predetermined one during operation. • CR Encoder cable is damaged. • CR Motor cable is damaged. • Irregular load • CR Encoder failure • CR Motor failure
• Remedy: 1. Replace the CR Encoder. 2. Replace the CR Motor.

• Code: 1229
• Description: PF Motor oscillation error
  The control terminal (Vre terminal) of the PF Motor driver has shorted out.
• Remedy: 1. Remove the foreign material. 2. If the error still occurs, replace the Main Board.

• Code: 122A
• Description: PF Motor overload error
  Overcurrent to the PF Motor was detected. • PF Encoder cable is damaged. • PF Motor cable is damaged. • Irregular load • PF Encoder failure • PF Motor failure
• Remedy: 1. Replace the PF Encoder. 2. Replace the Main Board.

• Code: 122D
• Description: PF Motor driving time-out error
  Abnormally-long driving duration of the PF Motor was detected. • Irregular load • Firmware becomes out of control.
• Remedy: Replace the Main Board.

• Code: 122E
• Description: PF Motor velocity deviation error
  The PF Motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF Encoder failure • PF Motor failure • SUB Board is damaged. • PF Motor driver failure
• Remedy: 1. Replace the PF Encoder. 2. Replace the PF Motor. 3. Replace the Main Board.

• Code: 122F
• Description: PF Motor lock error
  The PF Motor was driven at a speed abnormally slower than a predetermined one during operation. • CR Encoder cable disconnection • CR Motor cable disconnection • Irregular load • PF Encoder failure • PF Motor failure
• Remedy: 1. Replace the PF Encoder. 2. Replace the PF Motor.

• Code: 131B
• Description: Head driver (transmission gate) overheat error
  The temperature of the Head driver rises, and has reached a predetermined limit.
• Remedy: 1. Replace the Head FFC. 2. Replace the Print Head.