• Code: 1611
• Description: Roll Unit undetectable error
  The Roll Unit could not be detected during mechanism initialization process.
• Remedy: Connect the connector of the Roll Unit.

• Code: 1612
• Description: Roll Unit undetectable error at the start of operation
  When the ATC Motor started to operate, it was detected that the Roll Unit status is different from that detected during mechanism initialization process.
• Remedy: 1. Connect the connector of the Roll Unit. 2. Turn the printer off and back on.

• Code: 1613
• Description: Roll Unit undetectable error during operation
  The connector of the Roll Unit was disconnected during the ATC Motor was operating.
• Remedy: Connect the connector of the Roll Unit.

• Code: 1614
• Description: Reel Unit undetectable error at the start of operation
  When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process.
• Remedy: 1. Connect the connector of the Reel Unit. 2. Turn the printer off and back on.

• Code: 1615
• Description: Reel Unit undetectable error during operation
  The connector of the Reel Unit was disconnected during the Reel Motor was operating.
• Remedy: Connect the connector of the Reel Unit.

• Code: 1616
• Description: Roll Unit Board failure
  There is a problem with a specific bit on the board, which detects what device is connected to the board.
• Remedy: Replace the Sub-F Board of the Roll Unit.

• Code: 1617
• Description: Reel Unit Board failure
  There is a problem with a specific bit on the board, which detects what device is connected to the board.
• Remedy: Replace the Sub-F Board of the Reel Unit.

• Code: 1618
• Description: Roll/Reel Unit Board failure
  There is a problem with a specific bit on the board, which detects what device is connected to the board.
• Remedy: Replace the Sub-F Board of the Roll Unit and Reel Unit .