Description: After Heater power supply abnormal error 1
• Cable disconnection, breaking, blowout of a fuse, or heater failure. • AC cable (for the After Heater) disconnection
Remedy: 1. Reconnect the cable. 2. Replace the cable. 3. Replace the Sub-E Board. 4. Replace the After Heater.
Description: RTC data invalid error
The various absolute time settings stored on the NVRAM are abnormal.
Remedy: If the error still occurs after resetting the date and time, perform the followings. 1. Replace the RTC backup battery. 2. Replace the Main Board.
Description: RTC Access T/O error
The RTC circuit on the Main Board malfunctions.
Remedy: 1. Turn the power off and remove the RTC backup battery. 2. After several seconds, re-attach the battery and turn the power back on. 3. Reset the date and time settings of the RTC using the Service Program.
Description: Thermistor error
• The Head FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure
Remedy: 1. Replace the Head FFC. 2. Replace the Print Head.
Description: Transistor environmental temperature error
• Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor.
Description: Head error
• Connection failure of the Head FFC. • Electric parts or components are damaged due to improper Head FFC connection such as connecting it at an angle. • The drive circuit in the Print Head is damaged. • The fuse of the Main Board has blown.
Remedy: 1. Replace the Head FFC. 2. Replace the Print Head. 3. Replace the Main Board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.