Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson SureColor S70610 — Trang 13/14

Code: 1A41

Description: Head rank ID input error
An invalid Head rank ID was written to the NVRAM.
Remedy: Rewrite the Head rank ID with a correct one.

Code: 1A50

Description: I2C communication error between elements on ASIC and MAIN
An I2C communication error has occurred in the Main Board.
Remedy: Replace the Main Board.

Code: 1A51

Description: I2C communication error between elements on ASIC and SUB
An I2C communication error between the Main Board and Sub Board has occurred.
Remedy: 1. Replace the FFC that connects the Main Board and Sub Board. 2. Replace the Sub Board. 3. Replace the Main Board.

Code: 1F80 ... 1FC1

Description: CSIC error
Remedy: 1. Replace the IC Holder. 2. Replace the Main Board.

Code: 2000

Description: NVRAM error
NVRAM erase or write error has occurred.
Remedy: Replace the Main Board.

Code: 2002

Description: SDRAM error
Writing to the SDRAM was attempted, but nothing could be written to it.
Remedy: Replace the Main Board.

Code: 2003

Description: FLASH BOOT checksum error
• Installing the firmware has failed. • The Flash ROM is out of order.
Remedy: 1. Re-install the firmware. 1. Replace the Main Board.

Code: 200A

Description: F/W load error
Reading/decompressing the firmware has failed.
Remedy: 1. Re-install the firmware. 2. Replace the Main Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie