Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson SureColor T3000 — Trang 12/13

Code: 1FE2

Description: Device access error
Remedy: TBD

Code: 1FE3

Description: Missing device
Remedy: TBD

Code: 2000

Description: NVRAM error
NVRAM erase or write error has occurred.
Remedy: Replace the MAIN BOARD.

Code: 2002

Description: SDRAM error
Writing to the SDRAM was attempted, but nothing could be written to it.
Remedy: Replace the MAIN BOARD.

Code: 2003

Description: FLASH BOOT SUM CHECK error
Installing the firmware has failed. • The Flash ROM is out of order.
Remedy: 1. Re-install the firmware. 2. Replace the MAIN BOARD.

Code: 2008

Description: Wrong FLASH device error
Remedy: TBD

Code: 200A

Description: F/W load error
Reading/decompressing the firmware has failed.
Remedy: 1. Re-install the firmware. 2. Replace the MAIN BOARD.

Code: 200D

Description: System interrupt watchdog time-out error
A system failure such as CPU failure, or defective cash has occurred.
Remedy: Replace the MAIN BOARD.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie