Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Color LaserJet CM6030 MFP — Trang 14/22

Code: 55.01.YY

Display: 55.01.YY DC Controller Memory Error
Description: There is an error with the DC controller memory.
Remedy: 1. Turn the product off and then on. 2. Perform an engine test. 3. Verify the connectors on the DC controller. 4. Replace the DC controller.

Code: 55.02.YY

Display: 55.02.YY Outgoing Parity Error
Description: There is a DC controller outgoing parity error.
Remedy: 1. Turn the product off and then on. 2. Perform an engine test. 3. Verify the connectors on the DC controller. 4. Replace the DC controller.

Code: 55.03.YY

Display: 55.03.YY No Engine Responsesupply unit.
Description: DC controller no response error.
Remedy: 1. Turn the product off and then on. 2. Perform an engine test. 3. Verify the connectors on the DC controller. 4. Replace the DC controller.

Code: 55.04.YY

Display: 55.04.YY Communications Timeout
Description: There was a DC controller communications timeout.
Remedy: 1. Turn the product off and then on. 2. Perform an engine test. 3. Verify the connectors on the DC controller. 4. Replace the DC controller.

Code: 55.05

Display: 55.05 Error
Description: An interruption occurred during a remote firmware update.
Remedy: 1. Turn the product off and then on. 2. Remove any third-party hardware. 3. Attempt the remote firmware update again.

Code: 56.01

Display: 56.01 - Illegal input
Description: There was an illegal input.
Remedy: 1. Turn the product off and then on. 2. Remove any third-party hardware. 3. Attempt the remote firmware update again.

Code: 56.02

Display: 56.02 - Illegal output
Description: There was an illegal output.
Remedy: Turn the product off and then on.

Code: 57.01

Display: 57.01 Error
Description: The VOC fan (FM4) experienced an error.
Remedy: 1. Reconnect the connectors of the VOC fan (J1921) and the DC controller PCA (J103). 2. Measure the voltage between connectors J103-4 and J103-6 on the DC controller PCA right after the product is turned on. If the voltage changes from 0V to approximately 24V, replace the VOC fan.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie