Code :

Code: 41.07.YZ
Display: 41.07.YZ Error To continue
Description: A media transportation error has occurred.
• Y = 0 Photo media 1, Photo media 2, Photo media 3, Designated media 2, Designated media 3, or N/ A, typed or AutoSense • Y = 1 AutoSense (Normal): special case distinguished from typed Normal • Y = 2 Normal: typed (not AutoSense) • Y = 3 Light media 1, 2, or 3: typed or AutoSense • Y = 4 Heavy media 1: typed or AutoSense • Y = 5 Heavy media 2: typed or AutoSense • Y = 6 Heavy media 3: typed or AutoSense • Y = 7 Glossy media 1: typed or AutoSense • Y = 8 Glossy media 2: typed or AutoSense • Y = 9 Glossy media 3: typed or AutoSense • Y = A Glossy film: typed or AutoSense • Y = B OHT: typed or AutoSense • Y = C Label • Y = D Envelope 1, Envelope 2, or Envelope 3 • Y = E Rough (designated media 1): typed or AutoSense • Z = 1 Tray 1 • Z = 2 Tray 2 • Z = 3 Tray 3 • Z = 41 Tray 4 • Z = 5 Tray 5 • Z = 6 Tray 6 • Z = D Duplexer
Remedy: Turn the product off, and then on. If the error persists, replace the DC controller PCA.

Code: 42.XX.YY
Display: 42.XX.YY
Description: Internal system failure
Remedy: Turn the product of,f then on, and retry. If the error persists, clear the firmware image from the active partition by using the Partial Clean item in the Preboot menu.

Code: 47.00.XX
Display: 47.00.XX
Description: Backchannel internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.01.XX
Display: 47.01.XX
Description: Image transformer internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.02.XX
Display: 47.02.XX
Description: Job parser internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.03.XX
Display: 47.03.XX
Description: Print job internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.04.XX
Display: 47.04.XX
Description: Print spooler 9100 internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.

Code: 47.05.00
Display: 47.05.00
Description: Print spooler framework internal error
Remedy: Turn the product off, and then on again. Resend the print job. If the error persists, execute the Partial Clean item in the Preboot menu.