Code :

Code: 59.63
Display: 59.63 ERROR
Description: The yellow-image-drum motor has experienced a rotational error.
Remedy: 1. Perform the image-drum-motors component test in the DIAGNOSTICS menu. 2. Reconnect the connectors of the yellowimage- drum motor (J1712) and the DC controller PCA (J138). 3. Replace the yellow-image-drum motor.

Code: 59.C0
Display: 59.C0 ERROR
Description: The developer-alienation motor has experienced a rotational error.
Remedy: 1. Perform the alienation-motor component tests in the DIAGNOSTICS menu. 2. Reconnect the connectors of the yellow/ magenta-developing disengagement motor (J1719), cyan/black-developing disengagement motor (J1718), print cartridge PCA (J404, J405, J406, J408), and the DC controller PCA (J141, J142). 3. Check the print-cartridge drive unit if the adjustment pin sticks in. 4. Check the main drive unit if the lever locks. 5. Replace the developer-alienation motor.

Code: 59.F0
Display: 59.F0 ERROR
Description: The transfer-roller alienation motor has experienced an error.
Remedy: 1. Check the ITB-alienation sensor (m) by performing either the manual sensor test or the paper-path sensors test in the DIAGNOSTICS menu. 2. Reconnect the connectors of the ITB home-position sensor (J2010), the cartridge driver PCA (J406, J407), and the DC controller PCA (J142). 3. Perform the ITB-contact/alienation component test in the DIAGNOSTICS menu. 4. Reconnect the connectors of the primary-transfer-roller disengagement motor (J1709) and the DC controller PCA (J110). 5. Replace the primary-transfer-rolleralienation motor.

Code: 59.XY
Display: 59.XY ERROR
Description: A temporary printing error has occurred.
Remedy: Turn the product off, and then turn the product on. If this message persists, contact an HPauthorized service or support provider.

Code: 60.03
Display: 60.03 ERROR
Description: The Tray-2 lifter motor has experienced an error.
Remedy: 1. Check the Tray-2 paper-surface sensor (u) in the MANUAL SENSOR TEST 2 submenu in the DIAGNOSTICS menu. 2. Reconnect the connectors of the lifter motor (J1920) and the DC controller PCA (J112). 3. Replace the lifter drive unit.

Code: 60.04
Display: 60.04 ERROR
Description: The Tray-3 lifter motor has experienced an error.
Remedy: 1. Check the Tray-3 paper-surface sensor (y) in the MANUAL SENSOR TEST 2 submenu in the DIAGNOSTICS menu. 2. Reconnect the connector of the upper- PD driver PCA (J8105A). 3. Replace the upper-PD-cassette-lifter drive unit.

Code: 60.05
Display: 60.05 ERROR
Description: The Tray-4 lifter motor has experienced an error.
Remedy: 1. Check the Tray-4 paper-surface sensor (c) in the MANUAL SENSOR TEST 2 submenu in the DIAGNOSTICS menu. 2. Reconnect the connector of the middle- PD driver PCA (J8105B). 3. Replace the middle-PD-cassette-lifter drive unit.

Code: 60.06
Display: 60.06 ERROR
Description: The Tray-5 lifter motor has experienced an error.
Remedy: 1. Check the Tray-5 paper-surface sensor (g) in the MANUAL SENSOR TEST 2 submenu in the DIAGNOSTICS menu. 2. Reconnect the connector of the lower- PD driver PCA (J8105C). 3. Replace the lower-PD-cassette-lifter drive unit.