Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet Z6800 Photo Production Printer — Trang 17/17

Code: 94:01

Description: The paper is not suitable for color calibration, being too dark (low L), or too coloured (a or b above thresholds), or transparent
Remedy: • If accurate color is important, change to a different paper type (preferably an HP paper type) that satisfies the conditions for color calibration. • If accurate color is not important, print without color calibration.

Code: 94:02

Description: Color calibration error: some of the consistency checks on the Embedded SpectroPhotometer (ESP) measurements failed, which could have several causes
Remedy: • Ensure that the paper type selected corresponded to the paper actually loaded. • Inspect the CLC printed target to detect any printing defect: banding, missing colors, etc. If an issue is detected, run the Printing IQ Full Calibration procedure to fix any printing problems. • Check that color calibration is supported for this paper type: translucent, plain and heavily colored papers cannot be color-calibrated. • If the problem persists, try calibrating an HP coated paper (if available). If this calibration fails, replace the ESP.

Code: 94:10

Description: Embedded SpectroPhotometer (ESP) contaminated by aerosol
Remedy: • Replace the ESP Embedded SpectroPhotometer (ESP). • Perform the ESP basic test (CLC) to ensure that the replaced part is working correctly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie