Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet Enterprise 700 M725 — Trang 17/31

Code: 32.1C.29

Display: 32.1C.29
Description: Reset of networking subsystem failed.
Remedy: Turn the product off, and then on and retry

Code: 32.1C.2B

Display: 32.1C.2B
Description: Reset formatter time-out.
Remedy: Turn the product off, and then on and retry

Code: 32.1C.2E

Display: 32.1C.2E
Description: Reset engine time-out.
Remedy: Turn the product off, and then on and retry

Code: 32.1C.2F

Display: 32.1C.2F
Description: Reset failure.
Remedy: Turn the product off, and then on and retry

Code: 32.21.00

Display: 32.21.00
Description: Corrupt firmware in external accessory.
Remedy: Turn the product off, and then on and retry. If the error persists, clear the firmware image from the active partition by using the Partial Clean item in the Preboot menu.

Code: 33.01.01

Display: 33.01.01
Description: Read back data from ICB and pass to SR clients so that they can recover occurred Information.
Remedy: This is an informational message, and no action is required.

Code: 33.01.02

Display: 33.01.02
Description: Save data received from SR clients is written into ICB NVRAM initial-save-occurred Information.
Remedy: This is an informational message, and no action is required.

Code: 33.01.03

Display: 33.01.03
Description: Save and Recover functionality OK after previously being disabled. Save/Recover status OK Information.
Remedy: This is an informational message, and no action is required.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie