• Code: 58.00.04
• Display: 58.00.04 Error
• Description: The printer experienced a low voltage power supply unit malfunction.
• Remedy: 1. Turn the printer off and then back on. NOTE: This error might be caused by source power related issues. Determine if the area where the printer is located has experienced brown outs or is subject to power quality issues. 2. Ensure printer is plug into dedicated power outlet. 3. Reconnect the connector (J102) on the DC controller PCA. 4. If error persists, replace the Low Voltage Power Supply (LVPS).

• Code: 58.01.04
• Display: 58.01.04 Error
• Description: 24V power supply error during operation. During regular printing operation the 24V power supply experienced an error.
• Remedy: 1. Turn the printer off and then back on. NOTE: This error might be caused by source power related issues. Determine if the area where the printer is located has experienced brown outs or is subject to power quality issues. 2. Ensure printer is plug into dedicated power outlet. 3. If error persists, replace the Low Voltage Power Supply (LVPS).

• Code: 58.02.04
• Display: 58.02.04 Error
• Description: 24V power supply error during boot or wake. During printer power on or when waking from sleep mode, the printer experienced an error with the 24V power supply.
• Remedy: 1. Turn the printer off and then back on. NOTE: This error might be caused by source power related issues. Determine if the area where the printer is located has experienced brown outs or is subject to power quality issues. 2. Ensure printer is plug into dedicated power outlet. 3. If error persists, replace the Low Voltage Power Supply (LVPS).

• Code: 59.00.00
• Display: 59.00.00 Motor error
• Description: Paper Path motor malfunction.
• Remedy: 1. Turn the printer off, then back on.2. Run the pickup motor drive test in the actuator drive mode to verify that the fuser motor is functioning properly. If it is not, replace the pickup motor.3. Reconnect the connector (J105) on the DC controller PCA.

• Code: 59.00.04
• Display: 59.00.04 Duplex Motor error
• Description: Duplex motor M8 malfunction.
• Remedy: 1. Turn the printer off, then back on.2. Run the duplex motor M8 drive test in the actuator drive mode to verify that the fuser motor is functioning properly. If it is not, replace the replace duplex drive assembly. PN: RM2-0006-000CN

• Code: 59.00.30
• Display: 59.00.30 or 59.00.40: Fuser error
• Description: Fuser motor (M4) start up error or fuser motor (M4) rotational error.
• Remedy: action1. Turn the printer off, then back on.2. Open right door and remove fuser. Rotate fuser gears to ensure they move freely, if they do not replace the fuser.3. Run the fuser motor drive test in the actuator drive mode to verify that the fuser motor is functioning properly. If it is not, replace the fuser motor. PN: RM2-0077-000CN4. Reconnect the connector (J44) of the fuser motor and connector (J114) on the DC controller PCA.

• Code: 59.00.40
• Display: 59.00.30 or 59.00.40: Fuser error
• Description: Fuser motor (M4) start up error or fuser motor (M4) rotational error.
• Remedy: action1. Turn the printer off, then back on.2. Open right door and remove fuser. Rotate fuser gears to ensure they move freely, if they do not replace the fuser.3. Run the fuser motor drive test in the actuator drive mode to verify that the fuser motor is functioning properly. If it is not, replace the fuser motor. PN: RM2-0077-000CN4. Reconnect the connector (J44) of the fuser motor and connector (J114) on the DC controller PCA.

• Code: 59.00.B0
• Display: 59.00.B0 Replace Toner Collection Unit
• Description: The toner collection unit (TCU) is full.
• Remedy: 1. Check the toner collection unit. If the unit is full, replace it.2. Toner can clog the ITB if the toner collection unit is full.