Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M712 Enterprise 700

Code: 11.00.YY

Display: 11.00.YY Internal clock error
Description: The product real-time clock has experienced an error. • XX = 01: Clock battery failed • XX = 02: Real-time clock failed
Remedy: Whenever the product is turned off and then turned on again, set the time and date at the control panel. If the error persists, replace the formatter.

Code: 20.00.00

Display: 20.00.00 Insufficient memory: <Device>
Description: The product has experienced a memory error. You might have tried to transfer too many fonts or macros
Remedy: Press the OK button to print the transferred data. Some data might be lost. Reduce the page complexity or add product memory.

Code: 21.00.00

Display: 21.00.00 Page too complex
Description: The page decompression process was too slow for the product.
Remedy: Press the OK button to continue. There may be some data loss.

Code: 33.WX.YZ

Display: 33.WX.YZ Used board/disk installed
Description: An encrypted board or disk with existing data previously locked to a different product has replaced the original. If you continue, data is permanently lost.
Remedy: • To save the data on the board or disk, turn the product off. Replace the board or disk with another board or disk. • To delete the data on the board or disk and continue, press the OK button.

Code: 40.00.01

Display: 40.00.01 USB I/O buffer overflow
Description: The USB buffer overflowed during a busy state.
Remedy: 1. Press the OK button to print the transferred data. Some data might be lost. 2. Check the host configuration.

Code: 40.00.02

Display: 40.00.02 Embedded I/O buffer overflow
Description: Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications protocol might be in use.
Remedy: 1. Press the OK button to print the transferred data. Some data might be lost. 2. Check the host configuration

Code: 40.00.03

Display: 40.00.03 EIO <X> buffer overflow
Description: The product displays this message when the EIO card in the indicated slot has overflowed its I/O buffer during a busy state.
Remedy: Press the OK button to continue.

Code: 40.00.04

Display: 40.00.04 EIO <X> bad transmission
Description: The product displays this message when a connection with the card in the indicated slot has been abnormally broken.
Remedy: Press the OK button to continue.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie