Remedy: Turn the product off, then on. Check that there is no debris in the paper path or print zone that could be causing drag on the motor. The paper motor is not field replaceable.
Remedy: Turn the product off, then on. Check that there is no debris in the lower paper path (below the duplex module) that could be causing drag on the motor. Replace the duplex motor.
Remedy: Turn the product off, then on. Check that there is no debris in the upper paper path that could be causing drag on the motor. Check that all portions of the output drive rotate freely. Replace the output drive assembly.
Remedy: Turn the product off, then on. Verify that the pick tire moved. If it moved, the top of the page in the tray will move about an inch. Verify that the service/pick transmission is in the correct position. Check for a missing wavy spring in lower swing arm. NOTE: The Tray 1 pick tire/index sensor is not field replaceable.
Remedy: Turn the product off, then on. Verify that the pick tire moved. If it moved, the top of the page in the tray will move about an inch. Verify that the service/pick transmission is in the correct position. Check for a missing wavy spring in lower swing arm. NOTE: The Tray 1 pick tire/index sensor is not field replaceable.
Remedy: Turn the product off, then on. Check for any objects obstructing printbar motion. Check that there is no debris on the printbar lift guide rods. Check the printbar lift shaft. Replace it if it is defective.