Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP OfficeJet Pro X551 — Trang 2/8

Code: 0xC6FDxx10

Description: Pen bad DSTR
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

Code: 0xC6FDxx11

Description: Pen bad DSTR
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

Code: 0xC6FDxx12

Description: Pen TSR fault
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

Code: 0xC6FDxx13

Description: Pen stuck, cold
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

Code: 0xC6FDxx14

Description: Pen not heating
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

Code: 0xC6FDxx15

Description: Pen too cold
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).

Code: 0xC6FDxx15

Description: Pen too cold
Remedy: Wait for the printhead to warm up. This can take up to four hours. Replace the printbar.

Code: 0xC714xx20

Description: Pen VDD short low
Remedy: Turn the product off, then on. Ensure that the three printbar flex cables are inserted correctly in the main PCA.. If any of the printbar flex cables are damaged, replace them. Order part number CN459-60407. Replace the printbar. The main PCA could be defective (rare).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie