• Code: 44.16.09
• Description: Error Event log message (Multifunction product only.) Upload of image file failed. A folder or filename length is too long.
• Remedy: 1. If this is the first time the error has occurred, check the destination URL and filename in the SharePoint job configuration to verify no folder or filename exceeds the maximum of 128 characters.2. If the error occurs repeatedly, try sending to a different folder on the SharePoint site or changing the filename (which could include prefix or suffix).

• Code: 44.16.0A
• Description: Error Event log message (Multifunction product only.) Upload of the image file failed. The image file already exists on the server and is checked out for editing by another user.
• Remedy: 1. If this is the first time the error has occurred, verify that the filename used by the job is not checked out on the SharePoint site.2. If the error occurs persists, use a different filename for the job.

• Code: 44.16.0B
• Description: Error Event log message (Multifunction product only.) Upload of the image file failed. The image file already exists on the server and the job was set to not overwrite files.
• Remedy: 1. If this is the first time the error has occurred, set the job to overwrite existing files.2. If the error occurs persists, use a different filename for the job.

• Code: 44.16.0D
• Description: Error Event log message (Multifunction product only.) Encountered an unexpected processing error while transferring attachments to the destination SharePoint.
• Remedy: 1. If this is the first time the error has occurred, verify settings in job configuration and restart the job.2. If the error persists, turn the product off, and then on and retry the job.3. If error continues, reset to factory settings. Upgrade to current version of firmware.

• Code: 44.16.0E
• Description: Error Event log message (Multifunction product only.) The attachment filename already exists at the destination, and the flag to fail on filename collisions was set. This file will not be sent.
• Remedy: 1. If this is the first time the error has occurred, use a different filename or verify that the filename is not already in use.2. If the issue persists, use a unique filename or disable the flag to fail on filename collision.

• Code: 44.16.0F
• Description: Error Event log message (Multifunction product only.) Not enough memory to process the current SharePoint Job.
• Remedy: 1. If this is the first time the error has occurred, cancel and/or restart the job, breaking it up into small jobs.2. Repeat this process if the error persists until job goes through.

• Code: 44.16.10
• Description: Error Event log message (Multifunction product only.) SharePoint server is using an invalid certificate.
• Remedy: 1. If this is the first time the error has occurred, send the SharePoint job to a non-secure address, or send the job to a SharePoint server that has a valid certificate.2. If the error occurs repeatedly, send the job to a different, trusted SharePoint server.

• Code: 44.16.FF
• Description: Error Event log message (Multifunction product only.) Unexpected error occurred in the SharePoint resource device code.
• Remedy: 1. If this is the first time the error has occurred, verify settings in job configuration and restart the job.2. If error persists, turn the product off, and then on and retry the job.3. If error continues, reset to factory settings. Upgrade to current version of firmware.