Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 361 — Trang 4/12

Code: C-1114

Description: SD: Folding motor (M10) drive abnormality.
- The folding roller home sensor (PS22) does not turn ON within a specified period of time after M10 turns ON.
Causes: Folding motor (M10) Folding roller home sensor (PS22) SD control board (SDCB)

Code: C-1115

Description: SD: Conveyance motor (M8) drive abnormality.
- Within a specified period of time after M8 turns ON, the ON of a motor lock signal is detected for a prescribed period of time in succession.
- A specified period of time after M8 turns OFF, the OFF of a motor lock signal is detected for a prescribed period of time in succession.
Causes: Conveyance motor (M8) SD control board (SDCB)

Code: C-1116

Description: FS-522: Exit roller release motor (M6) drive abnormality.
- When the shutter is closed, the shutter home sensor (PS16) does not turn ON within a specified period of time after M6 turns ON.
- When the shutter is open, PS16 does not turn OFF within a specified period of time after M6 turns ON.
Causes: Exit roller release motor (M6) Shutter home sensor (PS16) FS control board (FSCB)

Code: C-1117

Description: FS-522: Alignment motor /Fr (M5) drive abnormality.
- While in the home position search, the alignment home sensor /Fr (PS7) does not turn ON within a specified period of time after M5 turns ON.
- While in the home position search, PS7 does not turn OFF within a specified period of time after M5 turns ON.
Causes: Alignment motor /Fr (M5) Alignment home sensor /Fr (PS7) FS control board (FSCB)

Code: C-1118

Description: FS-522: Exit paddle solenoid (SD2) drive abnormality.
- While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON.
- While in the paper hold-down operation, PS11 does not turn OFF within a specified period of time after SD turns ON.
Causes: Exit paddle solenoid (SD2) Exit paddle home sensor (PS11) FS control board (FSCB)

Code: C-1119

Description: FS-523: Punch motor (M11) drive abnormality.
- The punch encoder sensor (PS15) does not turn OFF within a specified period of time after M11 turns ON.
Causes: Punch motor (M11) FS control board (FSCB)

Code: C-1120

Description: FS-523: Hole punch selector motor (M14) drive abnormality (inch system only)
- When starting the punch 2- hole position switch drive, the hole punch position switch (SW4) is not turned ON in the specified period of time after the M14 is turned ON.
- When starting the punch 3- hole position switch drive, the SW4 is not turned OFF in the specified period of time after the M14 is turned ON.
Causes: FS control board (FSCB) Hole punch selector motor (M14)

Code: C-1121

Description: PU: Punch motor (M1) drive abnormality.
- The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON.
Causes: Punch motor (M1) Punch position sensor /1 (PS2) Punch position sensor /2 (PS3) FS control board (FSCB)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie