Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 4020 — Trang 10/22

Code: 322.56

Description: Separator/Pass-through motor PWM underflow (motor overspeed)
Remedy: Step 1: 8. Remove the option tray insert. 9. Check the separator roll assembly gear under the tray base for the following: - Gear tooth breakage - Freedom of rotation Does it move freely, and is it free of wear or damage? Yes: Go to step 2. No: Replace the tray.
Step 2: Check the cable J10 on the option tray controller board. Is it properly connected and free of damage? Yes: Go to step 3. No: Replace the tray.
Step 3: Check the separator roll assembly for wear or damage. Is it free of wear or damage? Yes: Contact the next level of support. No: Replace the separator roll assembly.

Code: 324.57

Description: ACM motor no first encoder
Remedy: Step 1: Check the cable J11 on the option tray controller board. Is it properly connected? Yes: Go to step 2. No: Reseat the cable.
Step 2: 10. Remove the option tray insert and bypass the tray present sensor. 11. POR into the Diagnostics Menu and perform a feed test: Diagnostics Menu >Feed Test > choose an option tray 12. Check the ACM for proper operation. Does the ACM freely rotate three times before displaying a jam message? Yes: Go to step 3. No: Replace the ACM assembly.
Step 3: Is the ACM gear free of wear or damage? Yes: Contact the next level of support. No: Replace the ACM assembly.

Code: 324.58

Description: ACM motor stop error
Remedy: Step 1: Check the cable J11 on the option tray controller board. Is it properly connected? Yes: Go to step 2. No: Reseat the cable.
Step 2: 10. Remove the option tray insert and bypass the tray present sensor. 11. POR into the Diagnostics Menu and perform a feed test: Diagnostics Menu >Feed Test > choose an option tray 12. Check the ACM for proper operation. Does the ACM freely rotate three times before displaying a jam message? Yes: Go to step 3. No: Replace the ACM assembly.
Step 3: Is the ACM gear free of wear or damage? Yes: Contact the next level of support. No: Replace the ACM assembly.

Code: 324.59

Description: ACM motor PWM underflow (motor overspeed)
Remedy: Step 1: Check the cable J11 on the option tray controller board. Is it properly connected? Yes: Go to step 2. No: Reseat the cable.
Step 2: 10. Remove the option tray insert and bypass the tray present sensor. 11. POR into the Diagnostics Menu and perform a feed test: Diagnostics Menu >Feed Test > choose an option tray 12. Check the ACM for proper operation. Does the ACM freely rotate three times before displaying a jam message? Yes: Go to step 3. No: Replace the ACM assembly.
Step 3: Is the ACM gear free of wear or damage? Yes: Contact the next level of support. No: Replace the ACM assembly.

Code: 325.60

Description: Hardware error - Board ID unknown
Remedy: Step 1: Check all connections to the option tray controller board. Are the properly connected? Yes: Go to step 2. No: Reseat the cables.
Step 2: Check printer’s firmware level. Is it up to date? Yes: Go to step 3. No: Update the firmware.
Step 3: Replace the option tray. Does the error remain? Yes: Contact the next level of support. No: The problem is solved.

Code: 325.61

Description: Hardware error - Option type unknown
Remedy: Step 1: Check all connections to the option tray controller board. Are the properly connected? Yes: Go to step 2. No: Reseat the cables.
Step 2: Check printer’s firmware level. Is it up to date? Yes: Go to step 3. No: Update the firmware.
Step 3: Replace the option tray. Does the error remain? Yes: Contact the next level of support. No: The problem is solved.

Code: 325.62

Description: Hardware error - Product ID unknown
Remedy: Step 1: Check all connections to the option tray controller board. Are the properly connected? Yes: Go to step 2. No: Reseat the cables.
Step 2: Check printer’s firmware level. Is it up to date? Yes: Go to step 3. No: Update the firmware.
Step 3: Replace the option tray. Does the error remain? Yes: Contact the next level of support. No: The problem is solved.

Code: 325.63

Description: Hardware error - Sensors are not plugged on the board.
Remedy: Step 1: Check all connections to the option tray controller board. Are the properly connected? Yes: Go to step 2. No: Reseat the cables.
Step 2: Check printer’s firmware level. Is it up to date? Yes: Go to step 3. No: Update the firmware.
Step 3: Replace the option tray. Does the error remain? Yes: Contact the next level of support. No: The problem is solved.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie