Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 4050 — Trang 13/27

Code: 4501-111.63

Description: Laser malfunction
Timed out on reboot sweep.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4501-111.64

Description: Laser malfunction
Attempted to exceed open loop drive limits.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4501-111.65

Description: Laser malfunction
Attempted to exceed open loop drive limits.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4501-111.66

Description: Laser malfunction
Failed alignment of printhead.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4501-111.67

Description: Laser malfunction
Failed alignment of printhead.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4501-111.68

Description: Laser malfunction
Too many fake HSYNCs while aligning printhead.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4501-111.69

Description: Laser malfunction
Too many fake HSYNCs while aligning printhead.
Causes: • Printhead (PH) • Controller board (CTLB)
Remedy: 1 Check PH cables JLSU1 and J6 for proper connection. Reseat the cables if any abnormality is found. 2 Inspect PH cables and connectors. 3 Replace CTLB. 4 Replace PH.

Code: 4901

Description: FW/OS integrity verification error
• NG results from verification of the hash value of the controller FW. • Faulty, damaged, or illegally written ROM data.
Causes: Controller board (CTLB)
Remedy: 1 Turn OFF/ON the main power switch. 2 Rewrite the firmware. 3 Check CTLB for proper connection and correct as necessary. 4 Replace CTLB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie