Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 421 — Trang 5/12

Code: C-2001

Description: Image process communication abnormality
- Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB) While in the stand-by, a process Ready signal cannot be detected for a specified period of time.
Causes: Overall control board (OACB) Printer control board (PRCB)

Code: C-2201

Description: Developing motor (M3) speed abnormality.
- While M3 is ON, an EM error signal has been detected 5 times in succession within a specified period of time.
Causes: Developing motor (M3) Printer control board (PRCB)

Code: C-2202

Description: Drum motor (M1) speed abnormality.
- While M1 is ON, an EM error signal has been detected 5 times in succession within a specified period of time.
Causes: Drum motor (M1) Printer control board (PRCB)

Code: C-2301

Description: Drum cooling fan (FM4) abnormality.
- While FM4 is ON, an EM error signal has been detected 5 times in succession within a specified period of time.
Causes: Drum cooling fan (FM4) Printer control board (PRCB)

Code: C-2302

Description: Developing suction fan motor (FM6) abnormality.
- While FM6 is ON, an EM error signal has been detected 5 times in succession within a specified period of time.
Causes: Developing suction fan motor (FM6) Printer control board (PRCB)

Code: C-2303

Description: Developing cooling fan (FM7) abnormality.
- While FM7 is ON, an EM error signal has been detected 5 times in succession within a specified period of time.
Causes: Developing cooling fan (FM7) Printer control board (PRCB)

Code: C-2401

Description: High machine inside temperature abnormality.
- When the temperature around the drum is above 58 °C
Causes: TCR sensor (TCRS) Printer control board (PRCB)

Code: C-2402

Description: Erase lamp (EL) connector slip-off abnormality.
- When EL turns ON before starting an initial charging, EL abnormality has been detected 15 times in succession at prescribed intervals after a specified period of time.
Causes: Erase lamp (EL) Printer control board (PRCB)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie