Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 600 — Trang 15/20

Code: C-6709

Description: The adjustment data evacuated by resolutions is not available.
Causes: Overall control board (OACB)

Code: C-6710

Description: A density conversion gamma curve cannot be created normally.
Causes: Overall control board (OACB)

Code: C-6713

Description: Despite of the MPC not being terminated, the initial sampling of the APC is attempted.
Causes: Overall control board (OACB) Image controller firmware

Code: C-6714

Description: While executing the APC, the execution of the MPC is attempted.
Causes: Overall control board (OACB) Image controller firmware

Code: C-6717

Description: Sequentially shot page area abnormality. Due to an image area abnormality on the memory, images cannot be developed on the memory.
Causes: Overall control board (OACB) Image controller firmware

Code: C-6719

Description: The scan operation starts before the original skew adjustment is terminated. (The skew adjustment is too late.)
Causes: Printer control board (PRCB) Original conveyance sensor (PS306) Original skew sensor (PS307)

Code: C-6720

Description: The print operation starts before the paper mis-centering adjustment is terminated. (The mis-centering adjustment is too late.)
Causes: Centering sensor (PS66)

Code: C-6721

Description: The AGC is retried due to the decreased light volume of the exposure lamp. However, no error occurs.
Causes: Exposure lamp (L1)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie