Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 600 — Trang 3/20

Code: C-1003

Description: The communication between FS and PK fails. It shows an abnormal condition after 4 retries.
Causes: Relay board (RB) FNS control board (FNSCB) Punch drive board (PDB)

Code: C-1004

Description: The communication fails when the sub-CPU on the FNS control board (FNSCB) receives data.
Causes: FNS control board (FNSCB)

Code: C-1005

Description: The communication fails when the main-CPU on the FNS control board (FNSCB) receives data.
Causes: FNS control board (FNSCB)

Code: C-1101

Description: The shift unit does not reach the shift position or HP after the shift roller motor (M2) starts its operation.
Causes: FNS control board (FNSCB) Shift roller motor (M2) Shift roller home sensor (PS18)

Code: C-1101

Description: The shift motor (PS702) does not turn ON within a specified period of time after the shift motor (M703) starts operations.
Causes: SF control board (SFCB) Shift motor (M703) Shift home sensor (PS702)

Code: C-1102

Description: The main tray upper limit sensor (PS2) or the stapler paper exit upper limit sensor (PS7) does not turn ON within a specified period of time after the main tray lift motor (M3) starts its operation.
Causes: FNS control board (FNSCB) Main tray up down motor (M3) Main tray upper limit sensor (PS2) Stapler paper exit upper limit sensor (PS7)

Code: C-1102

Description: The tray upper limit sensor (PS703) or the tray lower limit sensor (PS704) does not turn ON within a specified period of time after the tray lift motor (M702) starts its operation. Or, PS703 does not turn ON within a specified period of time after it turns OFF.
Causes: SF control board (SFCB) Tray up/down motor (M702) Tray upper limit sensor (PS703) Tray lower limit sensor (PS704)

Code: C-1103

Description: The alignment home sensor /Up (PS8) does not turn OFF within a specified period of time after the alignment motor /Up (M5) starts its operation. Or, PS8 does not turn ON within a specified period of time after it turns OFF.
Causes: FNS control board (FNSCB) Relay board (RB) Alignment motor /Up (M5) Alignment home sensor /Up (PS8)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie