• Code: C-0101
• Description: An error detection signal is detected in succession for a specified period of time after the paper feed motor (M1) is turned ON.
• Causes: Paper feed motor (M1) Printer control board (PRCB)

• Code: C-0102
• Description: An error detection signal is detected in succession for a specified period of time after the LU paper feed motor (M101) is turned ON.
• Causes: LU paper feed motor (M101) LU drive board (LUDB)

• Code: C-0103
• Description: An error detection signal is detected in succession for a specified period of time after the registration motor (M5) is turned ON.
• Causes: Registration motor (M5) Printer control board (PRCB) ADU drive board (ADUDB)

• Code: C-0202
• Description: When the upper limit sensor /1 (PS2) is OFF, PS2 does not turn ON within a specified period of time after the paper lift motor /1 (M16) turns ON for its lifting operation.
• Causes: Tray 1 Paper lift motor /1 (M16) Printer control board (PRCB) Upper limit sensor /1 (PS2)

• Code: C-0204
• Description: When the upper limit sensor /2 (PS8) is OFF, PS8 does not turn ON within a specified period of time after the paper lift motor /2 (M17) turns ON for its lifting operation.
• Causes: Tray 2 Paper lift motor /2 (M17) Printer control board (PRCB) Upper limit sensor /2 (PS8)

• Code: C-0206
• Description: When the upper limit sensor /3 (PS14) is OFF, PS14 does not turn ON within a specified period of time after the paper lift motor / 3 (M18) turns ON for its lifting operation.
• Causes: Tray 3 Paper lift motor /3 (M18) Printer control board (PRCB) Upper limit sensor /3 (PS14)

• Code: C-0208
• Description: When the upper limit sensor /4 (PS20) is OFF, PS20 does not turn ON within a specified period of time after the paper lift motor / 4 (M19) turns ON for its lifting operation.
• Causes: Tray 4 Paper lift motor /4 (M19) Printer control board (PRCB) Upper limit sensor /4 (PS20)

• Code: C-0209
• Description: When the paper lift motor (M100) is ON, an error detection signal of M100 is detected in succession for a specified period.
• Causes: LU. Paper lift motor (M100) LU drive board (LUDB) Lower limit sensor (PS101) Upper limit sensor (PS109)