Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 751 — Trang 6/20

Code: C-1127

Description: The punch registration home sensor (PS303) does not turn ON within a specified period of time after the punch registration motor (M302) starts its operation. Or, PS303 does not turn OFF within a specified period of time after it turns ON.
Causes: FNS control board (FNSCB) Punch drive board (PDB) Punch registration motor (M302) Punch registration home sensor (PS303)

Code: C-1130

Description: The 1st stopper home sensor (PS3) does not turn ON within a specified period of time after the 1st stopper motor (M2) starts searching home position.
Causes: ZU control board (ZUCB) 1st stopper motor (M2) 1st stopper home sensor (PS3)

Code: C-1131

Description: The 2nd stopper home sensor (PS4) does not turn ON within a specified period of time after the 2nd stopper motor (M3) starts searching home position.
Causes: ZU control board (ZUCB) 2nd stopper motor (M3) 2nd stopper home sensor (PS4)

Code: C-1132

Description: The punch home sensor (PS301) does not turn ON within a specified period of time after the punch motor (M301) starts its operation.
Causes: FNS control board (FNSCB) PK control board (PKDB) Punch motor (M301) Punch home sensor (PS301)

Code: C-1133

Description: The punch shift home sensor (PS5) does not turn ON within a specified period of time after the punch shift motor (M5) starts searching home position. Or, PS5 does not turn OFF within a specified period of time after it turns ON.
Causes: Punch shift motor (M5) Punch shift home sensor (PS5) ZU control board (ZUCB)

Code: C-1134

Description: The EM signal of the conveyance motor cooling fan (M10) shows an abnormal condition within a specified period of time after M10 turns ON. This abnormal condition recurs after three retries.
Causes: Conveyance motor cooling fan (M10) ZU control board (ZUCB)

Code: C-1135

Description: The punch motor (M4) does not turn OFF within a specified period of time after it starts its operation.
Causes: Punch motor (M4) ZU control board (ZUCB)

Code: C-1136

Description: The punch switchover switch (MS2) does not change its status from ON to OFF or OFF to ON within a specified period of time after the punch switchover motor (M8) starts its operation.
Causes: Punch switchover motor (M8) Punch switchover switch (MS2) ZU control board (ZUCB)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie