Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 751 — Trang 4/20

Code: C-1104

Description: The paper exit roller motor (M7) does not complete the whole one rotation within a specified period of time after it starts its operation.
Causes: FNS control board (FNSCB) Paper exit roller motor (M7)

Code: C-1105

Description: The open/close operation is not completed within a specified period of time after the paper exit motor (M8) starts its operation. The paper exit home sensor (PS12) does not turn ON or OFF.
Causes: FNS control board (FNSCB) Paper exit opening motor (M8) Paper exit home sensor (PS12)

Code: C-1106

Description: The stapler movement motor (M11) does not reach HP within a specified period of time after it starts its operation. Or, it does not pass through HP within a specified period of time after it reaches the standby position for 2 staples.
Causes: FNS control board (FNSCB) Relay board (RB) Stapler movement motor (M11) Stapler movement home sensor (PS11)

Code: C-1107

Description: The clincher rotation motor (M4) does not reach HP within a specified period of time after it starts its operation. Or, it does not pass through HP within a specified period of time after it starts its skew rotation.
Causes: FNS control board (FNSCB) Relay board (RB) Clincher rotation motor (M4) Clincher rotation home sensor (PS14)

Code: C-1108

Description: The stapler rotation motor (M6) does not reach HP within a specified period of time after it starts its operation. Or, it does not pass through HP within a specified period of time after it starts its skew rotation
Causes: FNS control board (FNSCB) Relay board (RB) Stapler rotation motor (M6) Stapler rotation home sensor (PS13)

Code: C-1109

Description: The stapler motor home sensor / Fr (PS31) does not turn ON within a specified period of time after the stapler motor /Fr (M14) starts its operation.
Causes: FNS control board (FNSCB) Relay board (RB) Stapler motor /Fr (M14) Stapler motor home sensor / Fr (PS31)

Code: C-1110

Description: The stapler motor home sensor / Rr (PS30) does not turn ON within a specified period of time after the stapler motor /Rr (M9) starts its operation.
Causes: FNS control board (FNSCB) Relay board (RB) Stapler motor /Rr (M9) Stapler motor home sensor / Rr (PS30)

Code: C-1111

Description: The clincher motor home sensor / Fr (PS33) does not turn ON within a specified period of time after the clincher motor /Fr (M15) starts its operation.
Causes: FNS control board (FNSCB) Relay board (RB) Clincher motor /Fr (M15) Clincher motor home sensor /Fr (PS33)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie