Description: When the upper limit sensor /2 (PS21) is OFF, PS21 does not turn ON within a specified period of time after the paper lift motor / 2 (M20) turns ON for lifting operation. And at this time, an error detection signal (blowout of ICP) is detected.
Causes: Paper lift motor /2 (M20) Printer control board (PRCB) Upper limit sensor /2 (PS21) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 2
Description: When the upper limit sensor /2 (PS21) is OFF, PS21 does not turn ON within a specified period of time after the paper lift motor / 2 (M20) turns ON for lifting operation. And at this time, an error detection signal is not detected.
Causes: Paper lift motor /2 (M20) Printer control board (PRCB) Upper limit sensor /2 (PS21) DC power supply /2 (DCPS2) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 2
Description: When the upper limit sensor /3 (PS22) is OFF, PS22 does not turn ON within a specified period of time after the paper lift motor / 3 (M21) turns ON for lifting operation. And at this time, an error detection signal (24V cut off) is detected.
Causes: Paper lift motor /3 (M21) Printer control board (PRCB) Upper limit sensor /3 (PS22) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 3
Description: When the upper limit sensor /3 (PS22) is OFF, PS22 does not turn ON within a specified period of time after the paper lift motor / 3 (M21) turns ON for lifting operation. And at this time, an error detection signal (blowout of ICP) is detected.
Causes: Paper lift motor /3 (M21) Printer control board (PRCB) Upper limit sensor /3 (PS22) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 3
Description: When the upper limit sensor /3 (PS22) is OFF, PS22 does not turn ON within a specified period of time after the paper lift motor / 3 (M21) turns ON for lifting operation. And at this time, an error detection signal is not detected.
Causes: Paper lift motor /3 (M21) Printer control board (PRCB) Upper limit sensor /3 (PS22) Loose connection Tray rear end restriction plate misaligned Paper improperly loaded Tray 3
Description: The locking of the paper lift motor (M100) is detected. When the paper lift motor (M100) is ON, an error detection signal of M100 is detected in succession for 1 second.
Causes: Paper lift motor (M100) DC power supply /2 (DCPS2) LU drive board (LUDB) Lower limit sensor (PS101) Upper limit sensor (PS109) Loose connection
Description: When the upper limit sensor (PS109) or the lower limit sensor (PS101) is OFF, PS109 or PS101 does not turn ON within a specified period of time after the paper lift motor (M100) turns ON for its lifting or lowering operation. And at this time, an error detection signal (24V cut off) is detected.
Causes: Paper lift motor (M100) DC power supply /2 (DCPS2) LU drive board (LUDB) Lower limit sensor (PS101) Upper limit sensor (PS109) Loose connection
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.