• Code: C-1142
• Description: After start-up of the tray lift motor /Up (M201) operation, the tray upper limit sensor /Up (PS204) does not turn ON within a specified period of time.
• Causes: Confirmation of the wiring harness and the connector Confirmation of the tray /Up drive parts Tray upper limit sensor /Up (PS204) Tray lift motor /Up (M201) PI drive board (PIDB) FS control board (FSCB)

• Code: C-1143
• Description: After the conveyance motor (M203) turns ON, the M203 does not get to the predetermined speed within a specified period of time.
• Causes: Confirmation of the wiring harness and the connector Transfer motor (M203) PI drive board (PIDB) FS control board (FSCB)

• Code: C-1144
• Description: After the punch shift motor (M802) starts the home position search, the punch shift home sensor (PS803) does not turn ON even when a specified period of time elapses.
• Causes: Confirmation of the wiring harness and the connector Punch shift home sensor (PS803) Punch shift motor (M802) Punch drive board (PDB) FS control board (FSCB)

• Code: C-1152
• Description: After the 1st stopper motor (M2) starts the home position search, the 1st stopper home sensor (PS3) does not turn ON even when a specified period of time elapses.
• Causes: Confirmation of the wiring harness and the connector Confirmation of the 1st stopper drive parts 1st stopper home sensor (PS3) 1st stopper motor (M2) ZU control board (ZUCB)

• Code: C-1153
• Description: After the 2nd stopper motor (M3) starts the home position search, the 2nd stopper home sensor (PS4) does not turn ON even when a specified period of time elapses.
• Causes: Confirmation of the wiring harness and the connector Confirmation of the 2nd stopper drive parts 2nd stopper home sensor (PS4) 2nd stopper motor (M3) ZU control board (ZUCB)

• Code: C-1154
• Description: The punch home sensor (PS801) does not turn OFF within a specified period of time after the punch motor (M801) starts operation.
• Causes: Confirmation of the wiring harness and the connector Confirmation of the punch drive parts Punch home sensor (PS801) Punch motor (M801) Punch drive board (PDB) FS control board (FSCB)

• Code: C-1155
• Description: After the punch shift motor (M5) starts the home position search, the punch shift home sensor (PS5) does not turn ON even when a specified period of time elapses.
• Causes: Confirmation of the wiring harness and the connector Confirmation of the punch shift drive parts Punch shift home sensor (PS5) Punch shift motor (M5) ZU control board (ZUCB)

• Code: C-1157
• Description: After the punch motor (M4) turns on, the punch operation is not completed even when a specified period of time elapses. (The punch home sensor (PS6) does not turn OFF, or it does not turn ON after being turned OFF. )
• Causes: Confirmation of the wiring harness and the connector Confirmation of the punch drive parts Punch home sensor (PS6) Punch clutch (CL1) Punch motor (M4) ZU control board (ZUCB)