Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C3110 — Trang 3/8

Code: 0F52

Description: Toner level sensor/Y malfunction An error occurs on the toner level sensor/Y.
Causes: • Toner level sensor/Y (PS13) • Printer control board (PRCB)
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

Code: 0F53

Description: Toner level sensor/M malfunction An error occurs on the toner level sensor/M.
Causes: • Toner level sensor/M (PS14) • Printer control board (PRCB)
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

Code: 0F54

Description: Toner level sensor/C malfunction An error occurs on the toner level sensor/C.
Causes: • Toner level sensor/C (PS15) • Printer control board (PRCB)
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

Code: 0F55

Description: Toner level sensor/K malfunction An error occurs on the toner level sensor/K.
Causes: • Toner level sensor/K (PS16) • Printer control board (PRCB)
Remedy: 1 Check the connector between each sensor-PRCB CN21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Replace PRCB.

Code: 13C4

Description: Imaging unit/C new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/C • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

Code: 13C5

Description: Imaging unit/M new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/M • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

Code: 13C6

Description: Imaging unit/Y new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/Y • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.

Code: 13C7

Description: Imaging unit/K new article release. The status with the new unit is not cleared continuously for 3 times after the new imaging unit is set.
Causes: • Imaging unit/K • Printer control board (PRCB)
Remedy: 1 Reinstall the imaging unit. 2 Check the connector between imaging unit-PRCB CN221 for proper connection and correct as necessary. 3 Replace the imaging unit. 4 Replace PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie