Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C3110 — Trang 6/8

Code: C151

Description: ROM contents error upon startup (MSC) A fault is detected in a sequence of ROM contents check of the MFPB during starting.
Causes: MFP board (MFPB)
Remedy: 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace MFPB.

Code: C161

Description: Firmware update error A firmware updating sequence is not normally terminated.
Causes: MFP board (MFPB)
Remedy: 1 Check the cable used for updating the firmware for proper connection and correct any faulty connection as necessary. 2 Check the firmware updating file; if the file is not correct, update the firmware again. 3 Check the firmware updating procedure; if the procedure is not correct, update the firmware again. 4 Update the firmware again. 5 Check the MFPB connector for proper connection and correct any faulty connection as necessary. 6 Replace MFPB.

Code: D004

Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and MFP board (MFPB).
Causes: • MFP board (MFPB) • HDD (HDD)
Remedy: 1 Check the connector between hard disk-MFPB CN5, CN13 for proper connection and correct as necessary. 2 Reinstall the hard disk. 3 Replace the hard disk. 4 Replace MFPB.

Code: D091

Description: Hard disk full error The area made available as a user area is full during access to the hard disk.
Causes: • MFP board (MFPB) • HDD (HDD)
Remedy: 1 Set [Admin Settings] -> [Printer Settings] -> [HOLD JOB TIMEOUT] to [Disable]. 2 Check the connector between hard disk-MFPB CN5, CN13 for proper connection and correct as necessary. 3 Format the hard disk. 4 Replace the hard disk. 5 Replace MFPB.

Code: D092

Description: No hard disk (found during a disk check) The hard disk is not mounted.
Causes: HDD
Remedy: 1 Install and format the hard disk.

Code: D093

Description: Wrong hard disk (found during a disk check) • A hard disk intended for another model is mounted. • The hard disk capacity is short.
Causes: HDD
Remedy: 1 Replace the hard disk. 2 Format hard disk.

Code: D094

Description: Hard disk check disk error When the power switch ON, the hard disk fails to be checked.
Causes: HDD
Remedy: 1 Replace the hard disk. 2 Format the hard disk.

Code: D095

Description: Hard disk recovered (requiring reboot) When the power switch ON, the hard disk fails to be recovered.
Causes: HDD
Remedy: 1 Turn OFF/ON the power switch. 2 Replace the hard disk. 3 Format the hard disk.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie