Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C352P — Trang 10/14

Code: C4154

Description: Polygon motor/K failure to turn
Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PHICB. 4 Change MFPB.

Code: C4551

Description: Laser malfunction (cyan)
• SOS signal is not detected even after the lapse of a given period of time after staring the laser output.
• SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PHICB. 4 Change MFPB.

Code: C4552

Description: Laser malfunction (magenta)
Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PHICB. 4 Change MFPB.

Code: C4553

Description: Laser malfunction (yellow)
Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PHICB. 4 Change MFPB.

Code: C4554

Description: Laser malfunction (black)
Remedy: 1 Check the connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PHICB. 4 Change MFPB.

Code: C4705

Description: Image output time out
• No image data is output from the printer control board (PRCB).
Remedy: 1 Select [Service Mode] - [State Confirmation] - [Memory/HDD Adj.] - [Memory Bus Check] - [Memory-PRT], and conduct the memory bus check function. 2 Check the connectors on PRCB for proper connection and correct as necessary. 3 Change PRCB

Code: C4761

Description: Compression hardware timeout
• The hardware involved with the compression function offered by the printer control board (PRCB) does not respond.
Remedy: 1 When the error is displayed after the memory check, remove and insert the DIMM0 and DIMM1 again to recheck (C4765). 2 Change PRCB.

Code: C4765

Description: Extraction hardware timeout
• The hardware involved with the extraction function offered by the printer control board (PRCB) does not respond.
Remedy: 1 When the error is displayed after the memory check, remove and insert the DIMM0 and DIMM1 again to recheck (C4765). 2 Change PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie