Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C352P — Trang 12/14

Code: C5358

Description: Power supply cooling fan motor/ 2’s failure to turn
• The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M9 operation check MFPB CNLP-15 (ON) MFPB CNLP-16 (LOCK) C-10. 4 Change MFPB.

Code: C6102

Description: Drive home sensor malfunction
• The scanner home sensor is unable to detect the scanner located at its home position. • The scanner home sensor is unable to detect a scanner even when the scanner motor has been driven to move the scanner over the maximum travelling distance. • The scanner home sensor detects the scanner when the scanner has moved 5 mm from the position, at which it blocks the scanner Home Sensor.
Remedy: 1 Correct or change the scanner drive (cable, pulley, gear, belt) if it is faulty. 2 Correct the scanner motor set screw if loose. 3 Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. 4 Check the PC201, M201, SCADB and IPB connector for proper connection and correct as necessary. 5 PC201 I/O check, sensor check IPB PJ11IPB-8 (ON) T-13 6 M201 operation check SCADB PJ3SCADB-1 (REM) SCADB PJ3SCADB-3 (LOCK) Y-7. 7 Change SCADB. 8 Change IPB.

Code: C6103

Description: Slider over run
• The scanner home sensor detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.
Remedy: 1 Correct or change the scanner drive (cable, pulley, gear, belt) if it is faulty. 2 Correct the scanner motor set screw if loose. 3 Adjust [Image Position Leading Edge] and [Feed Direction Adjustment]. 4 Check the PC201, M201, SCADB and IPB connector for proper connection and correct as necessary. 5 PC201 I/O check, sensor check IPB PJ11IPB-8 (ON) T-13 6 M201 operation check SCADB PJ3SCADB-1 (REM) SCADB PJ3SCADB-3 (LOCK) Y-7. 7 Change SCADB. 8 Change IPB.

Code: C6301

Description: Scanner cooling fan motor’s failure to turn
• The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M202 operation check IPB PJ81IPB-2 (REM) IPB PJ81IPB-3 (LOCK) U-10. 4 Change IPB. 5 Change MFPB.

Code: C6302

Description: Exposure lamp cooling fan motor’s failure to turn
• The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
Remedy: 1 Check the connector of motor for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 M203 operation check IPB PJ82IPB-2 (REM) IPB PJ82IPB-3 (LOCK) U-11. 4 Change IPB. 5 Change MFPB.

Code: C6704

Description: Image input time out
• Image data is not input from the image processing board (IPB) to the printer control board (PRCB).
Remedy: 1 Select [Service Mode] - [State Confirmation] - [Memory/HDD Adj.] - [Memory Bus Check] - [Scanner-Memory], and conduct the memory bus function. 2 Check the connectors between IPB and PRCB for proper connection and correct as necessary. 3 Change PRCB. 4 Change IPB.

Code: C6751

Description: CCD clamp/gain adjustment failure
• The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment
Remedy: 1 Correct the harness connection between CCDB and IPB if faulty. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, CCD surface, and shading sheet if dirty 4 Correct reflective mirror of the scanner if faulty, or change scanner. 5 Change CCD sensor unit. 6 Change IPB.

Code: C8101

Description: Pressure/retraction mechanism failure before image reading See DF-608
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie